-
Out of stockKawasaki P/N: 41080-1004 Applications:
- 78 KZ1000D
- Z1R
-
Out of stockNew bearing and seal Kawasaki P/N: 42008-010 Applications:
- 1972-1975 H2 750
-
Out of stockQuality, reconditioned polished part. Kawasaki P/N: 42006-062 Applications:
- 76 KZ 900
-
Out of stockGenuine Kawasaki P/N: 42008-034 Nicely polished Includes P/N: 601B6206 Bearing 481J6200 Ring 92050-027 Seal Application:
- 77-78 KZ1000A
-
Out of stockQuality replacement part. Replaces Kawasaki P/N: 41080-1020 Our P/N: MD4063 Applications:
- 79-80 KZ1000 LTD
- 80 Z1 Classic
- 79 650 SR
- May fit others
-
Out of stockOEM Kawasaki P/N: 41080-008 RE-conditioned rear brake rotor kit with bolts and lock washers. Kit Includes P/N's:
- 41080-008 Rotor
- 92001-160 Bolt (4)
- 92088-023 Lock (2)
- 76-79 KZ750 B
- 77-78 KZ1000 LTD
- 77-79 KZ650 C
- 78 KZ650 D
-
Out of stockNew Old Stock Genuine Kawasaki P/N: 43001-1001 Applications:
- 1977-78 KZ1000 B1, B2 LTD
-
Out of stockNOS Kawasaki front spoke set, complete with nipples. Includes (20) 41028-084 (outer) and (20) 41027-085 (inner) Applications:
- 76-77 KZ900A
- 77-78 KZ1000A
- 76-79 KZ750B
- 76 KH500A
- Will fit others
-
Out of stockQuality, reconditioned polished part. Kawasaki P/N: 42006-030-80 Applications:
- 73 Z1 900
-
Out of stockVery nice front brake rotor, it is date coded 9F (1) Rotor 41080-001 (6) Replated Brake Rotor Bolts (3) 92088-014 Locks Applications:
- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Out of stockNice chrome cover came from an older inventory we purchased. We estimate the chrome is about 20 years old. Very nice shape. OEM Kawasaki P/N: 14026-039-80 Comes with P/N: 14026-012 Chain oiler cover, as shown. Applications:
- 77-78 KZ1000A
- 78 Z1R
- 77-78 KZ1000B (LTD)
-
Out of stockQuality, reconditioned polished part. Kawasaki P/N: 42006-053 Applications:
- 1974-1975 Z1 900
-
Out of stockReplaces Kawasaki P/N: 43015-033 Doremi P/N: 75-502 Applications:
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD KZ1000B
- 1978 KZ1000 Police C1, C1A
-
Out of stockReplaces Kawasaki P/N: 43015-1047 Doremi P/N: 75-505 Applications:
- 1980 KZ1000 MKII
- 1980 KZ1000D Z1R
-
Out of stockComplete rebuild kit. OEM Kawasaki P/N: 43041-001 This caliper has new bleeder, New brake pads, and has been powder coated. Applications:
- 72 H1B
- 73-75 H1 500
- 76 KH500
- 72 H1B
- 72-75 H1B
-
Front end fork assembly with wheel. We recently purchased a small warehouse of parts. This is in decent shape, front fender has some warping from storage. Front wheel is not bent. Tire looks okay. Not the original tire. Not a lot of miles on the front end. Front brakes are not working. Throttle housing still good. Has throttle lock. Sold as complete setup or will part out. Low cost shipping available upon request. Location: Gravestone Building
-
Out of stockWe removed this wheel from a Z1 900. Very nice drum. We can remove the drum for lower-cost shipping. Can also replace to 18" for additional cost. See video below. Applications:
- 73-75 Z1 900
- 76-77 KZ 900A
- Late 73-75 H2 750
-
Out of stockThis is a very nice restored rear wheel. OEM Kawasaki P/N: 42048-042 Date code: 7D Applications:
- 77-78 KZ1000A
-
Out of stockWheel consists of:
- Brand new DID Rim
- Buchanan Stainless Spokes and Nipples
- Polished Hub
- New Bearing and Seal
- 77-78 KZ1000A
- 76-77 KZ900A
- 76 KH500
- 77-79 KZ750B
- 70's KZ650
- May fit others
-
Out of stock
- OEM Spokes and Nipples
- New Bearings
- New DID Rim
- New Rim Band
- 1969-1975 H1 500
-
Out of stockRebuilt using quality parts Kawasaki P/N: 42048-023 DID rim 2.15 x 18 New spokes New bearings Applications:
- 73-75 Z1 900
- 76-77 KZ900A
- Late 73-75 H2 750
-
Kawasaki P/N: 41074-022 This rebuilt OEM wheel is in great shape! Stamped 5A, meaning it was built in 1975. New Old Stock Spokes, powder coated hub, new bearings and seals, perfect rim. Minimal tire iron marks on one minor spot. Great for nice everyday rider. Applications:
- 73-75 Z1 900
- 72-75 ALL H2 750
- 72-75 H1 500
-
Out of stockRebuilt using quality parts Kawasaki P/N: 42048-023 Rebuilt polished hub Buchanon stainless steel nipples and spokes New bearings Metal side valve tube-type rim Applications:
- 73-75 Z1 900
- 76-77 KZ900A
- Late 73-75 H2 750
-
Out of stockGenuine Kawasaki P/N: 41074-022. Very nice condition. Rebuilt front wheel, powder-coated hub, includes new bearings and seal. NOS genuine Kawasaki spokes. Rim is Takasago 1.85 x 19. Stamped "5A" Correct for 1975 Z1 900, H2 750, and H1 500. Will work on:
- 73-75 Z1 900
- 72-75 H2 750
- 72-75 H1 500
-
Out of stockRebuilt using quality parts Kawasaki P/N: 42048-023 Rebuilt polished hub Buchanon stainless steel nipples and spokes New bearings Metal side valve tube-type rim Applications:
- 73-75 Z1 900
- 76-77 KZ900A
- Late 73-75 H2 750
-
Out of stock
- NOS OEM Spokes and Nipples
- New Sealed Bearings
- NOS Date Coded 1975 Takasago Rim 305
- Hub vapor blasted and polished
- 1975 H1 500
- Will work on 69-75 or KH500, but is correct for 1975 H1