- 73-75 Z1 900
- 76-77 KZ900A
-
104 mm long ~ Aftermarket Kawasaki Part ~ Replaces Kawasaki P/N: 2) 92003-180 Applications: -
Genuine Kawasaki Part Length 31mm Collars have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 92027-160 -
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
Out of stock
Genuine Kawasaki Part ~ Freshly powder coated Kawasaki P/N: 46094-019 Applications:- 77-80 KZ 1000 A
- 77-80 KZ 1000 LTD
- 78-81 KZ 1000 C
- 78-80 KZ 1000 D Z1R
- 76-79 KZ 750 B
- 77-79 KZ 650
- Will fit others
-
Genuine Kawasaki ~ Used, Powder Coated Kawasaki P/N: 32105-006 Applications:- 1976-1977 KZ900A
- 1976 KZ900 LTD
- KZ900 Police
-
Out of stock
Notice the taper on the rib which is correct for 1977-1978 KZ1000 Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-100-80 Cover 14045-014 Gasket (New) Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000B LTD
- 1978 KZ1000C Police
- 1978 KZ1000D Z1R
- Will fit others
-
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-1056 Dyno Cover -Superseded P/N: 14031-1292 14045-014 Gasket (New) Applications:- 1981-1983 KZ1000J
- 1981-1982 KZ1000 CSR
- 1981-1982 KZ1000 LTD
- KZ1000 Police J Motor
- KZ1100A
- KZ1100-L1
- Will work on others
-
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14025-1244 Cover 11009-1220 Gasket NOS (2) 120P0635 Screws NOS Applications- 1981-1983 KZ1000J
- 1981-1982 KZ1000 LTD
- 1981-1982 KZ1000 CSR
-
All pages are nice, clear and legible; showing some discoloration due to age. Page edges are showing wear/dirt from use handling and storage. Cover/Binding are in place showing some wear/dirt from use, handling and storage. Print Date: June 1975 Kawasaki P/N: 99997-715 -
- Powder Coated Hub
- Buchanan Stainless Steel Spokes and Nipples
- New Bearings
- New DID Rim
- New Rim Band
- 1973-1975 Z1 900
- 1972-1975 H1 500
- 1972-1975 H2 750
-
All pages are nice, clear and legible. Page edges are showing wear/dirt from use, handling and storage. Cover and binding in place showing wear/dirt from use, handling and storage. Print Date: August 1, 1990 Kawasaki P/N: 99924-1144-01 Models Covered:- 1991 KX80-R1, S1, T1, V1
- 1991 KX100-B1
-
Out of stock
Handlebars are set up for internal wires. Chrome is pretty nice, has a few marks on the bottom. Genuine Kawasaki ~ Used Kawasaki P/N: 46003-1002 Applications:- 1977-1978 KZ1000 LTD
-
Genuine Kawasaki~Used One very small ding on top surface as shown. Minor surface scuffs as shown. Kawasaki P/N: 35004-1012 Applications:- 1977-1980 KZ1000 LTD
-
Genuine Kawasaki ~ Used, Reconditioned Kawasaki P/N: 92091-011 Superseded P/N: 92091-024 Applications:- 1969-1972 H1 500
-
Out of stock
Genuine Kawasaki ~ Used, Replated 374mm Long Kawasaki P/N: 43007-027 Applications:- 1973-1975 H1 500
- 1976 KH500
- 1972-1973 H2 750
- Early KZ650
- May fit others
-
Genuine Kawasaki ~ Used, Replated I.D.: 18mm Width: 35mm Height at Outer Lip: 34mm Kawasaki P/N: 42032-017 Applications:- 1969-1975 H1 500
- 1976 KH500
- 1977-1979 KZ650B
- May fit others