-
VIN# 16285 This bike has been sitting in our showroom for a while. It was purchased from the original owner years ago. In preparation to sell, we removed the exhaust pipe, repaired the bolts. Pulled the cylinder off and the clutch cover to see what’s going on, if the plates are okay. etc. The clutch was stuck, so it was repaired, and the gaskets replaced. Touched up skid plate and side stand. Nice seat, air intake is very pliable. We don’t think there is very much seat time on this bike. Full tune-up, carbs have been cleaned, new fuel line with clamps. New chain, new air cleaner with new foam. We had the cylinder head off; the piston is nice, there are still cross-hatch marks, no score marks, it’s not seized, Left crank bearing where the flywheel is, is perfect. Bike has original IRC tires. Original Suzuki grips. Aluminum fuel tank. Side stand is on the right. We believe this bike is 100% original but for the period correct add-ons, including tail light, Preston Petty endurance light, belly plate, hand made luggage rack with tool bag. Items included are the original NOS Suzuki headlight with brackets and hardware. Also a switch for the light and a wiring harness. These parts came in a box with the bike. This is not a fast bike. Original decals in place. Tiny dent on the upper right part of the tank. A great bike to ride at the AMA Vintage trials, great bike to restore, or every day rider. Possible low-cost shipping upon request.
-
Out of stockNicely polished Front Sprocket Cover with Clutch Inspection Cover. Genuine Kawasaki, Used Kawasaki P/N: 14026-1017 Applications:
- 1979-1980 KZ1000A MKII
- 1979-1980 KZ1000B LTD
- 1979-1981 KZ1000C Police
- 1980 KZ1000D Z1R
-
Parting this bike out. Please call with needs. 330-335-7365
Motor is stuck, missing tank, missing side covers, pipes are rusted through on bottom. Seat pan is rusty with holes. Missing point cover. Missing some airbox parts. No broken fins. Many parts are in common with the 77-78 Kawasaki KZ1000A LTD. Triple clamps would be slightly different offset. Meters, master cylinder and switches aren't too bad. If interested, please call us with needs. 330.335-7365 -
This piece came from a vintage drag inventory we recently acquired. Not sure if it is from a 1979 or 80 model as the part numbers differ. Should fit either, but the tubes must be used with the lower legs. Possible low-cost shipping upon request, or local pick up if preferred. WILL SEPARATE. Sold as shown - no returns
-
Out of stockMotor# KZT00AE079317 We are selling this rebuilt engine for our mechanic, Hilo. Mark II style head, 79 or 80 KZ1000 LTD. This motor has been down to the bare cases. First-over pistons. Everything is nice. Valve job, clutch is good. There is some pitting on the engine case on the top as shown. Motor cases have been vapor blasted. All new seals, gaskets, oil window brand new. No welding, no broken fins. Bolts and hardware have been replaced. all exhaust studs are nice, tachometer drive is nice. This is basically a nice, plug-in motor. A screw on the side has been repaired and there is a small hole, as shown. Does not have an ignition system in it. There is nothing broken, no broken fins. We have everything in stock to finish this motor. Applications:
- 73-75 Z1 900 chassis
- Up to 1980 KZ900, KZ1000.
- 79-81 KZ1000 Police Bike.
-
Out of stockGenuine Kawasaki, Used Contains the following Kawasaki P/N's: 14032-1015 Cover 14046-024 Gasket 52015-004 Sight Glass Applications:
- 1979-1980 KZ1000 LTD
- 1978-1981 KZ Police
- 1978-1980 Z1R
- 1979-1980 MKII
-
Clymer P/N: 352 Condition: Used Manual is in decent condition, showing some wear and discoloration due to age. Binding and cover in place. As we have more than one of these manuals, you may not receive the one pictured, but they are all in similar condition. Print Date: 1972 Pages: 132 Models Covered:
- A1 250cc 1966
- A1SS 250cc 1967
- A1R 250cc 1968
- A7 350cc 1967
- A7SS 350cc 1968
- A7R 350cc 1968
-
Kawasaki P/N: 99920-1124-01 Condition: Used All pages are clear and legible. Some pages do have dirt/fingerprints, but they do not interfere with the information. Showing some wear and discoloration form use, age, and storage. Binding is intact, there is writing on the cover. Pages: 55 Print Date: October 1980 Models Covered:
- 1981 KX80 C1 and KX80 D1
-
Out of stockThis side cover is in very nice shape. Has slight scuffs, as shown in center of cover. OEM Harley P/N: 66251-04A Applications:
- 04-13 Sportster, left side
-
Out of stockThis is a nice pair of Vetter Windjammer lowers for BMW twins. May fit others. Sold as shown. No returns.
-
Out of stockGenuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Condition: Used Pages are clear and legible, some dirt/fingerprints but they do not interfere with the information. Cover is showing dirt from use. Last couple pages and back cover showing some liquid stain but the pages are not stuck together. Binding is intact. Cover in place, back cover has some issues as shown. Pages: 119 Print Date: October 1984 Models Covered:
- 1985 XR80R/100R
-
Honda P/N: 61G405 Condition: Used All pages clear/legible with some fingerprints and smudges but they do not interfere with the information. Pages and cover have some discoloration due to age and storage. Binding in place and the cover is attached. Pages: 228 Print Date: September 1987 Models Covered:
- 1985-1988 CR80R
-
Condition: Used This manual is in good condition. All of the pages are clear and legible. Cover and pages are showing signs of age and storage. Binding is intact and cover is attached. Pages: 131 Print Date: 1975 Models Covered:
- 1969 and up 741cc Triumph Trident 3-cylinder Model T150 & T160
- 1969-1972 741cc Rocket 3-cylinder Model A75
-
Condition: Used Manual appears to have had quite a bit of use. Pages are all clear and legible, some pages may have dirt/fingerprints but they do not interfere with the information. Cover is dirty, there is a rip on the front and back along the spine. Cover is coming away from the manual. Binding is starting to come apart, wiring diagram in back is loose. It appears this manual has come in contact with liquid but none of the pages are stuck together. Pages: 135 Pages: 135