- 1982 KDX250-B2
-
Before starting to ride your motorcycle, please read this manual thoroughly in order to know your motorcycle's capabilities, its limitations, and above all, how to operate it safely. Kawasaki Manual P/N: 99920-1165-01 CONDITION: USED. All pages nice, clear, and legible; light discoloration; some with light fingerprints or marks. Little wear or dirt to the edges. Cover showing little wear or dirt from use, handling, and storage. *As we have multiple copies of this item, you may or may not receive the one shown in photos. They are in similar condition. Nice manual! Models Covered: -
This wheel assembly is great for unrestored every day rider. Rim has some marks and a few rust spots, otherwise very nice. OEM Kawasaki P/N: 42048-041 Consists of:- 41025-058 Genuine Takasago 2.5 x 18 rim
- (20) 41027-090 inner spokes
- (20) 41028-089 outer spokes
- KZ650
-
Out of stock
The pan and foam are in great condition. Cover is brand new. Kawasaki P/N: 53001-106 Applications:- 74-75 KZ400
- Looks like it will fit 76-77, but not 100% sure. Please check first.
-
This cover is used, but has been polished. OEM Kawasaki P/N: 41042-009 Comes with 3 NOS screws, P/N: 222E0508A Applications:- 73-75 Z1 900
- 72-75 H2 750
- 72-75 H1 500
-
Call with needs! 44,670 Miles on the odometer 10 speed, shaft drive. Many parts are not genuine. We purchased this bike because we needed parts off if it for another project. Motor is stuck. Dual-range transmission. Wheels are okay, tank is fair. Has some decent parts on it. One of the fork tubes has been goofed. Exhaust has been repaired. Carbs are not complete, missing the top. Tank needs attention, could be cleaned. Seat is goofed, as shown. Sitting as is, it needs a lot of work. THE TANK HAS BEEN SOLD 10/22 -
Please call with needs! Motor SC84E***0632 Frame SC04-2000361 Offering for parts only. Stock airbag, fenders are gooned, tires are rotted out. Kick starter okay, we are getting the points cover and right side cover polished. (not shown in photos). Chain guard pretty good. Intake manifolds are junk, dyna cover has been scratched, seat lock is bad, side covers are okay. Wiring harness must be tested. Seat lock is bad. Still good parts on this bike, and some are interchangeable with the KZ1000. -
Kawasaki P/N: 51001-1009-7V We bead blasted this tank to make sure it was able to accept emblems, as shown. Inside is nice, as shown. Outside has imperfections, as shown. Please keep in mind that the 78 KZ1000A takes a fuel valve that is held on with 2 bolts. Using the proper valve, this tank will fit: Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77 KZ1000A
- (Correct for a 78 KZ1000A)
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
This used piston is in nice shape. Applications:- 77-78 KZ1000A
- 78-79 KZ650 SR
- 78 Z1R
-
Genuine Kawasaki OEM P/N: 13031-1046 Applications:- 81-83 KZ1000J
- 81-82 KZ1000K LTD
- 82-83 KZ1000R Eddie Lawson Replica
-
VIN# JS1GV74G 7M2100830 ENG# V718-100878 53819 miles. Will be parting out from the motor to the carbs, wheels, etc. 4 into 1 header looks like it has some bluing. Bike starts and runs as shown. Needs some clean up. Has large front forks, right fork has some leaking. Tires are old. Wheels look good, battery is not good. Motor sounds good, no smoking. We just got this bike started. No warranties. Local pickup OK. Call with needs! See video of bike running, below. -
Out of stock
Restored part has been nicely polished. Includes:- 14027-019-80 cover
- 14050-007 gasket
- 220B0618 screws (2)
- 76-79 KZ750B
- 80 KZ750G
- 77-78 KZ400A
- 74-77 KZ400D
- 75-77 KZ400S
-
Powdercoated OEM Kawasaki P/N: 34003-037 Applications:- KZ900A
- 77-80 KZ1000A
- 78 Z1R
- 77-80 Kz1000 LTD
- KZ1000 G
- Will fit Z1 900
-
Powdercoated OEM Kawasaki P/N: 34003-036 Applications:- 73-75 Z1 900
- Early KZ900A
- 78 Z1R
- 77-80 Kz1000 LTD
- KZ1000 G
- Will fit Z1 900
-
Frame #: H1F-26166 Frame appears to be in good shape, except for water damage on lower right leg as shown on front. Does not appear to be bent. No title. This is an oversized item - countries with postal restrictions, please contact us for a shipping quotes. Local pickup welcome. Possible low-cost shipping available upon request. -
Nice used camshaft set, includes sprockets and bolts, as shown. Genuine Kawasaki P/N's: 12044-014 Intake- Superseded from 12044-004
- Superseded from 12044-005
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)