- 1972-1975 H2 750
-
Out of stockNew bearing and seal Kawasaki P/N: 42008-010 Applications:
-
Out of stockNicely polished front hub. Kawasaki P/N: 41034-041 Contains the following Kawasaki P/N's: (1) 41039-028 Spacer (2) 601B203 Bearing (1) 654A254008 Seal (1) 481J400D Snap Ring Applications:
- 1976-1977 KZ900A
- 1977-1978 KZ1000A
- 1976-1979 KZ750B
- KZ650B
- KH500
- KH400
-
Out of stockFreshly powder coated Genuine Kawasaki P/N: 44037-1015 Kit includes: 44037-1015 clamp (1) 92003-064 Bolts (2) 461F 1200 Washer (2) Applications:
- 80 KZ1000G Z1 Classic
- 79-80 KZ1000A
- 79-80 KZ1000 LTD
-
Out of stockGenuine Kawasaki ~ Used Grab bar is in pretty good condition, chrome is pitted as shown, minimal rust Kawasaki P/N: 32109-1016 Applications:
- 81-83 KZ650 H (CSR)
- 80-83 KZ750 H1 (LTD)
- 82 KZ750 M1 (CSR)
-
Out of stockLegs are polished to a high gloss finish. Consists of:
- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stockNotice the taper on the rib which is correct for 1977-1978 KZ1000 Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-100-80 Cover 14045-014 Gasket (New) Applications:
- 1977-1978 KZ1000A
- 1977-1978 KZ1000B LTD
- 1978 KZ1000C Police
- 1978 KZ1000D Z1R
- Will fit others
-
Out of stockAll pages nice, clear and legible; pages showing discoloration due to age; some pages show marks/fingerprints but they do not interfere with the information. Page edges showing wear/dirt from use, handling and storage. Cover/Binding in place showing wear/dirt from use, handling and storage. Cover is coming apart along the spine, as shown. Print Date: January 1977
-
Out of stockVapor blasted in-house for that clean, genuine look. New bearings and oil seal. Kawasaki P/N: 41034-041 Applications:
- 1976-1977 KZ900A
- 1977-1978 KZ1000A
- 1976-1979 KZ750B
- 1977-1979 KZ650B
-
Out of stockGenuine Kawasaki ~ Used Kawasaki P/N: 51001-100 Applications:
- 1974-1975 KZ400
-
Genuine Kawasaki - Used Early edition- shaft is half hollow, as shown. Kawasaki P/N: 13066-029 Kickstart Shaft 13078-011 Kickshaft Ratchet 13068-028 Kickstarter Gear 92028-126 Kickshaft Collar Applications:
- KZ750 B
- KZ900 A
- KZ900 LTD
- Z1 900
- 77 KZ1000 LTD
- 77 KZ1000 A
Item is eligible for free domestic shipping.
-
Frame # GA-258131 7539 miles WITH TITLE. Original paint. Pretty much all stock except for a switch on the left side. Not sure about the lights working. Carbs and gas tank cleaned, fuel valve has been cleaned out. Needs tires, both front and back are cracking. Starts when warm. Has no battery, so we cannot guarantee how the lights work. Has an oil tank, so no mixing required. Gears are all up. Speedometer works. Great bike to take along camping, nice project bike. Street legal.
-
Suzuki P/N: 99011-02B71-03A This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repairs. CONDITION: NEW OTHER All pages nice, clear, and legible; edges show very minor wear or dirt from handling or storage. Cover and binding in place showing wear from handling or storage. As we have more than one copy of this manual, you may or may not receive the manual shown in photos. All are in similar condition. PRINT DATE: 1995 CHAPTERS:
- General Instructions
- Periodic Maintenance
- Troubleshooting
- Machine Tuning
- Engine Dismounting and Mounting
- Cylinder, Piston and Exhaust Valve
- Clutch
- Kick Starter
- Transmission and Crankshaft
- Fuel System
- Cooling System
- Electrical System
- Front and Rear Wheels
- Front and Rear Brakes
- Front Fork and Steering
- Rear Suspension
- Service Data
- Special Tools and Material
- Wire, Cable and Hose Routing
- Specifications
- RM80