- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications: -
Quality Made Replacement Mirror with 10" Stem. Replaces Kawasaki P/N: 56002-021 Superseded P/N: 56001-1030 Applications:- Z1 900
- KZ900
- KZ1000A
- May fit others
-
Out of stock
Kit includes: 8) 8mm nuts 8) 8mm lock washers 4) 18067-018 gaskets Our P/N: 18067-018-8 Applications:- 1977-1980 KZ1000 All
-
Quality Reproduction Exact Replica Replaces Kawasaki P/N 92022-206 ~Sold in sets of 2~ Applications:- 72-73 H2 750
- 1972 S2 350
- 1972 H1 500
-
Sold as "Set" - as Pictured Replaces OEM PN: (2) 92071-064 and (4) 92071-056 Applications:- Z1900 73 - 75
- KZ900A
- KZ1000
- May Fit Others
-
Reproduction Clutch Cover Gasket* Replaces Kawasaki P/N: 14046-024 Supersedes To PN: 11060-1529 Applications:- Z1 73 - 75
- KZ900A 76 - 77
- KZ900 LTD 1976
- KZ1000 LTD 77 - 80
- Z1R 78 & 80
- Z1 CLASSIC 1980
- KZ1000G 1980
- KZ1000ST 79 - 80
Item is eligible for free domestic shipping. * Color may differ.
-
Quality reproduction part. Replaces Kawasaki P/N: 92074-006 Applications:- Z1 900
- KZ900A
- 74-75 H2
- KZ650
- Many others
-
Quality Reproduction Part Made in Japan Replaces Kawasaki P/N: 92075-172 Our P/N: 10811 Kit consists of:- (4) 92027-174 Collar
- (4) 92075-172 Damper meter rubber
- (4) 312B0500A Nut 5mm
- (4) 461F0500 Spring washer 5mm
- (4) 92022-241 Plain washer 5mm
- Z1900
- KZ900
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
These zinc plated American-made parts are exact replacements for the scarce earth plates. They meet or exceed OEM standards. These are #20 on the parts diagram shown. Replaces Kawasaki P/N: 23061-003 Applications- 1972-1973 H2
- 1972 H1B, C
- 1972 S2
-
Highest Quality Reproduction Replaces Kawasaki P/N: 2) 92001-143 Bolts 2) 315B1000 Nuts Application:- 74-75 Z1 10mm
- 78 & 80 Z1R
- 76-77 KZ900
- 74-75 H2 750
- KZ900 LTD
- KZ1000 POLICE
- KZ1000G CLASSIC
- 77-80 KZ1000A
- Many others
-
Quality reproduction parts. Kit contains all bolts and spacers to mount the engine. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000 LTD
- 78+80 Z1R
- 77-80 KZ1000A
-
Quality reproduction part, fits on cam cover. Also used on point wire. Replaces Kawasaki P/N: 21126-007 Superseded P/N: 21126-008 Our P/N: 10619 Applications:- Z1900
-
Replaces Kawasaki P/N: 46132-018 Applications:- Late 74-75 Z1 900
- 76-77 KZ900A
- Will fit others
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Highest Quality Reproduction Replacement Part. Made in Japan. Replaces Kawasaki P/N: 92066-017 Our P/N 15-7588 ~includes 4 plugs~ Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 1976- Kz900B LTD
- 77-80 Kz1000A
- 77-80 Kz1000B LTD
- 78 & 80 Kz1000D Z1R
- 78-81 Kz1000C Police
- 79-80 Kz1000E Shaft
- 1980 Kz1000-G1 Classic
-
High Quality Reproduction Part Made in the U.S.A. Replaces Kawasaki P/N:42045-018 Nut 18mm 550D4035 Pin Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 72-75 H2 750 Triple
- 77-80 KZ1000A
- 76-79 KZ750B
-
Set made of quality reproduction parts. Includes OEM P/N 44043-044 Washer (2) and 44044-012 Circlip (2) Applications:- 73-75 Z1 900
- 77-80 KZ1000A
- 73-75 H1 500
- 72 H1B
- 76-77 KZ900
- 77 KZ1000 LTD
- Z1R | KZ1000D
- H2 750
- KZ650
- KZ750 B
- May fit others
-
This kit is made up of good quality parts, including Motion Pro fuel line. Because of the size of the Pingel fuel valve, we had to use the single outlet so that it would not interfere with the stock Z1 side cover. Quality parts for a quality fuel valve. Kit Contains:- (1) fuel line 2FT Motion Pro
- (6) 1/2" clips
- (2) 5/16" clip
- (1) T line
-
Carburetor Holder Set - Left & Right Quality Made Reproduction Part Replaces Kawasaki P/N's: (2) 16065-028 Right (2) 16065-029 Left (4) 92068-006 Rubber Plug Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900 All
- 1977-1980 KZ1000 All
-
Bearings to fit rear brake hub and sprocket carrier. Kit P/N: 0215-0830 Replaces Kawasaki P/N's: 1) 601B6304Z Bearing 1) 601B6304 Bearing 1) 601B6206 Bearing 1) 92050-027 Seal Applications:- 1972-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- May fit others
-
Set of 2 Rear Passenger Foot Peg Rubbers Highest Quality Reproduction! Replaces Kawasaki P/N: 92076-009 Applications:- A1, A1SS
- A7, A7SS
- H1 500, H1C
- W1, W1SS
- W2SS, W2TT
-
Out of stock
Chrome Exhaust Clamp Set of 2 Quality Japanese Made Reproduction Part Replaces Kawasaki P/N: 92037-103 Sold as Shown (set of 2) Applications:- 73-75 Z1 900
- 76-77 KZ900 A
-
Footrest bar cap. Sold as a set of 4 Quality part made in the USA Replaces Kawasaki P/N: 92102-010 Applications:- Z1 900
- KZ900 LTD
- KZ900A
- Z1R
- KZ1000A 77-80
- KZ1000LTD 77-80
- KZ750B 76-79
- KZ650
-
This is an exact replica of the original master cylinder ribbed rubber dust cover. Replaces Kawasaki P/N: 43069-001 Our P/N: 11224 Applications:- 73-75 Z1 900
- 76-77 KZ900 A
- 1976 KZ900 LTD
- EARLY KZ400
- 77-78 KZ1000 LTD
- EARLY KZ1000 POLICE
- Will fit others
-
Quality Reproduction Part Replaces Kawasaki P/N: 56018-261 Kit contains both left and right emblems Lock nuts P/N: 92018-005 Application:- 77-78 KZ1000A
-
Quality Reproduction Part Replaces Kawasaki P/N: 56014-049 Manufacturers P/N: KFR17-93700 Kit Contains: (1) 56014-049 right emblem (1) 56013-054 left emblem (4) 92012-003 screws Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- *May Fit Others
-
Quality reproduction, replaces Kawasaki P/N's: 92075-078 Rubber Damper (Kit contains 4) 92075-146 Rubber Damper (Kit contains 2) 92075-141 Rubber Damper (Kit contains 2) Also comes with 2 6mm bolts and washers, as shown Our P/N: 10808 Application:- Z1 900
- Will fit many more
-
Kit Contains: 2) 92001-038 Bolt 12mm head, 2) 312B0800 13mm nut Applications:- 73-74 Z1 900
- 69-72 H1 500
- A1 & A155 250 Twin
- A7 & A755 350 Twin
- May fit others
-
Out of stock
Will replace the following part #s 69-74 CB750:- 33400-341-702
- 33450-341-702
- 33650-300-000
- 33610-300-000
- Will fit others
-
These are the petcocks we use on all of our special project bikes. Replaces Kawasaki P/N: 51023-040 Kit includes: (1) 8210-T-AH Petcock (1) A2002C Adapter 24mm Applications:- H2 750
- H1 500
- KH 500
-
Out of stock
Quality Made in Japan Gasket Set Set of 4 Replaces KAWASAKI P/N: 16019-031 Applications:- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- 78 & 80 Z1R
- 79-80 KZ1000E SHAFT
- Early KZ650