- 1973-1975 Z1 900
- 1976-1977 KZ900 All
- 1977-1980 KZ1000 All
-
Carburetor Holder Set - Left & Right Quality Made Reproduction Part Replaces Kawasaki P/N's: (2) 16065-028 Right (2) 16065-029 Left (4) 92068-006 Rubber Plug Applications: -
This kit is made up of good quality parts, including Motion Pro fuel line. Because of the size of the Pingel fuel valve, we had to use the single outlet so that it would not interfere with the stock Z1 side cover. Quality parts for a quality fuel valve. Kit Contains:- (1) fuel line 2FT Motion Pro
- (4) 5/16 clips
- (2) 1/4 clips
- (1) T line
-
Quality Reproduction Part Replaces Kawasaki P/N: 56014-049 Manufacturers P/N: KFR17-93700 Kit Contains: (1) 56014-049 right emblem (1) 56013-054 left emblem (4) 92012-003 screws Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- *May Fit Others
-
High Quality Reproduction Part Made in the U.S.A. Replaces Kawasaki P/N:42045-018 Nut 18mm 550D4035 Pin Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 72-75 H2 750 Triple
- 77-80 KZ1000A
- 76-79 KZ750B
-
Footrest bar cap. Zinc Plated Sold as a set of 4 Quality part made in the USA Replaces Kawasaki P/N: 92102-010 Applications:- Z1 900
- KZ900 LTD
- KZ900A
- Z1R
- KZ1000A 77-80
- KZ1000LTD 77-80
- KZ750B 76-79
- KZ650
-
Highest Quality Reproduction Replacement Part. Made in Japan. Replaces Kawasaki P/N: 92066-017 Our P/N 15-7588 ~includes 4 plugs~ Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 1976- Kz900B LTD
- 77-80 Kz1000A
- 77-80 Kz1000B LTD
- 78 & 80 Kz1000D Z1R
- 78-81 Kz1000C Police
- 79-80 Kz1000E Shaft
- 1980 Kz1000-G1 Classic
-
Bearings to fit rear brake hub and sprocket carrier. Kit P/N: 0215-0830 Replaces Kawasaki P/N's: 1) 601B6304Z Bearing 1) 601B6304 Bearing 1) 601B6206 Bearing 1) 92050-027 Seal Applications:- 1972-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- May fit others
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Replaces Kawasaki P/N: 46132-018 Applications:- Late 74-75 Z1 900
- 76-77 KZ900A
- Will fit others
-
Quality reproduction part, fits on cam cover. Also used on point wire. Replaces Kawasaki P/N: 21126-007 Superseded P/N: 21126-008 Our P/N: 10619 Applications:- Z1900
-
Quality reproduction parts. Kit contains all bolts and spacers to mount the engine. Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-80 KZ1000 LTD
- 78+80 Z1R
- 77-80 KZ1000A
-
Highest Quality Reproduction Replaces Kawasaki P/N: 2) 92001-143 Bolts 2) 315B1000 Nuts Application:- 74-75 Z1 10mm
- 78 & 80 Z1R
- 76-77 KZ900
- 74-75 H2 750
- KZ900 LTD
- KZ1000 POLICE
- KZ1000G CLASSIC
- 77-80 KZ1000A
- Many others
-
These zinc plated American-made parts are exact replacements for the scarce earth plates. They meet or exceed OEM standards. These are #20 on the parts diagram shown. Replaces Kawasaki P/N: 23061-003 Applications- 1972-1973 H2
- 1972 H1B, C
- 1972 S2
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Quality Reproduction Part Made in Japan Replaces Kawasaki P/N: 92075-172 Our P/N: 10811 Kit consists of:- (4) 92027-174 Collar
- (4) 92075-172 Damper meter rubber
- (4) 312B0500A Nut 5mm
- (4) 461F0500 Spring washer 5mm
- (4) 92022-241 Plain washer 5mm
- Z1900
- KZ900
-
Quality reproduction part. Replaces Kawasaki P/N: 92074-006 Applications:- Z1 900
- KZ900A
- 74-75 H2
- KZ650
- Many others