- (1) fuel line 2FT Motion Pro
- (4) 5/16 clips
- (2) 1/4 clips
- (1) T line
-
This kit is made up of good quality parts, including Motion Pro fuel line. Because of the size of the Pingel fuel valve, we had to use the single outlet so that it would not interfere with the stock Z1 side cover. Quality parts for a quality fuel valve. Kit Contains: -
Out of stock
This is a set of four NGK spark plug covers for the 73-75 Kawasaki Z1 Comes as shown *Items taken out of packaging for photo purposes only Replaces Kawasaki P/N: 21130-020 & 21130-019 Our P/N: 35-8082 -
Out of stock
Legs are polished to a high gloss finish. Consists of:- 1) 44005-045 Left Hand Outer Tube
- 1) 44006-043 Right Hand Outer Tube
- 2) 44009-014 Fork Seals
- 2) 44043-044 Washer NOS
- 2) 44044-012 Circlip NOS
- 2) 44010-018 Dust Shield
- 2) 28012-009 Reflector (used)
- 2) 92094-011 Reflector Rubber (used)
- 2) 220B0408A Screw NOS
- 2) 44045-002 Fork Drain Gasket NOS
- 73-75 Z1 900
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Out of stock
Kawasaki Genuine Part ~ Used Very nice cover. Very minimal chain marks. Has some marking on the inside as shown as well. Includes one each Used Kawasaki P/N:- 14024-007 Transmission Cover
- 92049-004 Seal
- 92050-048 Seal
- 92050-024 Seal (SS P/N: 92049-1506)
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-78 KZ1000 A
- 77-78 KZ1000 LTD
- 78 Z1R
- Early KZ1000 Police
- Early KZ900 Police
- Early Z1 Police
-
Contains 16115-013 Oil Plug and 92055-049 O-Ring Applications:- 73-75 Z1 900
- KZ 1000
- KZ 1300
- KZ 900
- and more
-
Left hand engine cover Contains Kawasaki P/N’s: 14031-053 Cover 14045-014 Gasket (New) OEM polished dyno cover, correct for Z1 / KZ 900 Will fit up to 1978 KZ 1000 -
Out of stock
This is a very nice polished, early edition clutch cover. Has some minor scratches from shelf life. This would be a perfect addition for your favorite bike. It is lighter in weight than the late model cover. We believe this is for 73-76 because of the thinner ribs on the inside. Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 76 Kz900B LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 14032-082 cover (supersedes to 14032-121)
- 52015-004 oil gauge window
- 14046-024 gasket
-
Replaces Kawasaki P/N: 43015-018 Applications:- 1973-1975 Z1 900 using dual disc
- Can be used on most vintage motorcycles using dual disc including KZ1000 LTD and KZ900 LTD
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 43064-001 Applications:- 1977 KZ1000
- 73-75 Z1 900
- 76 KZ900 LTD
- 76-77 KZ900A
- 76-79 KZ750B
- 72-75 H2 750
- 72-75 H1 500
- 73 S2A 350
- KZ650B
- KH400
- KH500
- S3 400
- KZ400
-
Quality reproduction part, made in Japan Kawasaki replacement P/N:43048-002 Application:- 73-75 Z1900
-
New Old Stock Kawasaki P/N: 23028-018 Applications:- 73-75 Z1900
- 74-75 H2
- S3
- KH400
- KE100
- F11
- Will fit others
-
Out of stock
Kawasaki P/N: 16077-007 Applications:- 1973-1975 Z1 900
-
Out of stock
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41078-1012 Applications:- KZ650-E1
- KZ650-F1
- KZ750-G1
- KZ1000-A4 (1980)
- KZ1000-B4 (LTD) (1980)
- KZ1000-D3/Z1R (1980)
- KZ1000-G1 (Z1 Classic)
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 14024-008 Sold as shown Applications:- 73-75 Z1 900
- 76-77 KZ900A
- KZ900 LTD
- Z1 Police
- KZ900 Police
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 92027-1177 Sold as shown Applications:- 79-80 KZ1000 LTD
- 80 KZ1000G (Z1 Classic)
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 42032-071 Sold as shown Applications:- 77 - 80 KZ1000A
- 77 - 80 KZ1000 LTD
- 78 + 80 Z1R
- Early KZ1000 Police
-
Good quick fix for meters that have been dented, or flaking Our P/N: 58-12410 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- May fit others
-
Includes P/N 25012-023 Speedometer Cover 25012-024 Tachometer Cover Our P/N: 58-85100 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- KZ1000 77-78
- Z1 900 73-75
- May fit others
-
Kawasaki new old stock Kawasaki PN: 23050-002 Applications:- Z1 900 73-75
- H2 750 72-75
- KZ 900 LTD REAR
- KZ 1000A 77-78
- KZ 900A 76-77
- KZ 750B
- KZ 650
- Many others
-
104 mm long ~ Aftermarket Kawasaki Part ~ Replaces Kawasaki P/N: 2) 92003-180 Applications:- 73-75 Z1 900
- 76-77 KZ900A
-
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Out of stock
Quality re-manufactured stator coil wiring harness Applications:- 73-75 Z1 900
- 78 & 80 Z1R
- 76-77 KZ 900A
- 76 KZ 900 LTD
- 77-80 KZ 1000 LTD
- KZ 1000G Z1 Classic
-
Genuine Kawasaki ~ Used, Replated Kawasaki P/N: 42032-037 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900
-
Kawasaki P/N: 42037-023 Applications:- 1973-1975 Z1 900
- Z1 Police
- 1976-1977 KZ900A
- KZ900C2 Police
- 1972-1975 H2 72
-
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14025-1244 Cover 11009-1220 Gasket NOS (2) 120P0635 Screws NOS Applications- 1981-1983 KZ1000J
- 1981-1982 KZ1000 LTD
- 1981-1982 KZ1000 CSR
-
Quality Reproduction Parts Includes Kawasaki P/N: 1) 92007-031 Bolt 1) 92022-230 Washer Our PN: 92007-031 Applications:- 73-75 Z1 900
- 76-77 KZ900 All
- 74-75 H2 750
- 78, 80 Z1R
- 73-75 H1
-
Carburetor Holder Set - Left & Right Quality Made Reproduction Part Replaces Kawasaki P/N's: (2) 16065-028 Right (2) 16065-029 Left (4) 92068-006 Rubber Plug Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900 All
- 1977-1980 KZ1000 All
-
Quality Reproduction Grab Rail with Hardware Kawasaki P/N: 35032-022 (10276) Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
-
Out of stock
Quality Reproduction Part Replaces Kawasaki P/N: 92064-035 Applications:- Early Z1 900
- May work on others
-
Bearings to fit rear brake hub and sprocket carrier. Kit P/N: 0215-0830 Replaces Kawasaki P/N's: 1) 601B6304Z Bearing 1) 601B6304 Bearing 1) 601B6206 Bearing 1) 92050-027 Seal Applications:- 1972-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- May fit others
-
- Powder Coated Hub
- Buchanan Stainless Steel Spokes and Nipples
- New Bearings
- New DID Rim
- New Rim Band
- 1973-1975 Z1 900
- 1972-1975 H1 500
- 1972-1975 H2 750
-
Out of stock
Set of 2 Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23019-022 Applications below -
Made in Japan 219Hx122 Replaces Kawasaki P/N: 21070-003 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1977-1978 KZ1000 Police
- 1978 Z1R
-
Quality Made Reproduction Replaces Kawasaki P/N: 11060-1074 Superseded Kawasaki P/N: 16112-002 Applications:- 1973-1975 Z1
- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 77-80 KZ1000
- 1978 & 1980 Z1R
- KZ1000 Police
- KZ1000J
- GPz1100
-
Kawasaki P/N: 23019-023 Applications:- 73-75 H1 500 D, E, F
- 1982 KZ250 L1 (CSR BELT)
- 1972 H2 750 Mach IV
- 1983 KZ250 W1 (LTD BELT)
- 74-75 H2 750 B, C Mach IV
- 81-82 KZ305 A1-A2 (CSR)
- 1976 KH250 A5
- 1982 KZ305 B1 (CSR BELT)
- 76-78 KH400 A3-A5
- 87-88 KZ305 B2-B3
- 1976 KH500 A8
- 81-83 KZ440 A2-A3,B2,D2-D5,G1
- 77-80 KZ1000 A1-A4, A2A, A3A
- 80-83 KZ550 C1 -C4,D1,H1-H2
- 77-80 KZ1000 B1-B4 LTD
- 77-79 KZ650 B1-B3, B2A
- 1978 KZ1000 C1, C1A Police
- 77-79 KZ650 C1-C3 Custom
- 79-80 KZ1000 E1-E2 Shaft
- 78-79 KZ650 D1-D2, D1A SR
- 1980 KZ1000 G1 Classic
- 1980 KZ650 E1 LTD
- 81-83 KZ1000 J1-J3
- 1980 KZ650 F1
- 81-82 KZ1000 K1-K2 (LTD)
- 81-83 KZ650 H1-H3 (CSR)
- 81-82 KZ1000 M1-M2 (CSR)
- 1984 KZ700 A1
- 82-83 KZ1000 R1-R2 Eddie Lawson Replica
- 76-82 KZ750 B1-B4,E1-E3,G1,H1-H3,L3,M1,N1-N2,R1
- 81-82 KZ1100 A1-A2 (SHAFT)
- 76-77 KZ900 A4-A5,B1
- 81-82 KZ1100 B1-B2 (GPz)
- 73-75 S1 A, B, C Mach I
- 1982 KZ1100 D1 (SPECTRE)
- 72-73 S2 A Mach II
- 79-82 KZ1300 A1-A4
- 74-75 S3 A Mach II
- 1980 KZ1300 B2
- 73-75 Z1 900 A, B
- 78-79 KZ200 A1-A2
- 83-84 ZX1100 A
- 80-81 KZ250 D1-D2
- 83-85 ZX650 A,E
-
Quality Made Replacement Mirror with 10" Stem. Replaces Kawasaki P/N: 56002-021 Superseded P/N: 56001-1030 Applications:- Z1 900
- KZ900
- KZ1000A
- May fit others
-
Genuine Kawasaki ~ Reconditioned Kawasaki P/N: 33044-001 Applications:- 1974-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900
- 1976 KZ900 LTD
- 1977-1980 KZ1000 (All)
- May fit others
-
Dyna suppression core spark plug wires use the highest grade of graphite suppression core to to reduce electrical noise and increase engine performance. Two wires each 48" Long (cut to length; can be used on up to four cylinders) Our P/N: DW800 Applications:- Suzuki GS1100
- Kawasaki Z1 900
- Kawasaki KZ1000
- Many other 4 cylinder Japanese bikes
-
Kawasaki P/N's: (2) 220B0408A Screw - Superseded P/N: 220B0408 (2) 44045-002 Washer Our P/N: 220B0408A Applications:- 1973-1975 Z1 900
- 1972-1975 H1 500
- 1972-1975 H2 750
- 1976-1977 KZ900A
- May work on others
-
Quality made reproduction parts. Replaces Kawasaki P/N's: (5) 220B0308A Screw (5) 461F0300 Spring Washer Our P/N: 220B0308 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900
- 1977-1980 KZ1000 A, B
- Will fit other KZ1000
-
Side Cover Emblem Nut Lock, 3mm Exact replica of original Kawasaki P/N: (2) 92018-005 Our P/N: (10036) Applications: See below -
Replaces Kawasaki P/N: 92059-147 Our P/N: 10097 Quality Made Reproduction Bike takes 2. Hose is approximately 39 1/2" long. Applications:- Z1 900
- KZ1000
- KZ650
- Many more
-
Out of stock
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92065-081 Superseded by P/N: 43049-1070 Applications:- Z1 900
- Z1R
- F11
- 76-79 KZ750B
- KH250
- 77-78 KZ1000
- S1
- 77-80 KZ1000 LTD
- KH400
- KZ900
- Z1 Classic KZ1000G