- 73-75 Z1 900
- 76-77 KZ900A
- 77 KZ1000A
- (Correct for a 78 KZ1000A)
-
Kawasaki P/N: 51001-1009-7V We bead blasted this tank to make sure it was able to accept emblems, as shown. Inside is nice, as shown. Outside has imperfections, as shown. Please keep in mind that the 78 KZ1000A takes a fuel valve that is held on with 2 bolts. Using the proper valve, this tank will fit: Applications: -
Quality reproduction part Replaces OEM Kawasaki P/N: 44013-037 Set of 2 Fork Tubes Applications:- 76-77 KZ900A
- 76 KZ900 LTD
- 73-75 Z1 900
- 77 KZ1000 A
-
Out of stock
Our P/N: DC8-1 This coil set is 5-OHM Great for use with ignition with points. Wires available. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
- Will work on others
-
Our P/N:DC1-1 This coil set is 3-OHM Great for use with electronic ignition. Wires available. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
- Will work on others
-
The DYNA S Electronic Ignition System was designed as a points replacement. Totally self-contained for easy installation. All components fit under the point cover, replacing the original points. It is designed for use with stock OEM, or other coils, or combinations of coils that have at least 3-ohms primary resistance. No more points to set! Our P/N DS2-1 Applications:- 73 - 75 Z1 900
- 76 - 77 Kz900
- 77 - 81 Kz1000
-
Out of stock
Mini coil set 3 OHM Dual, set of 2. This is the part we use on our Z1 900 and KZ1000 73-78 restorations. Will work on others. We also have wires and lower units in stock. -
Quality replacement part. Replaces Kawasaki P/N: 41080-001 Our P/N: MD4069LS Applications:- 73-75 Z1 900
- 72-75 H2 750
- 72-75 H1 500
-
Out of stock
Quality, reconditioned polished part. Kawasaki P/N: 42006-030-80 Applications:- 73 Z1 900
-
Freshly powdercoated front hub Genuine Kawasaki P/N: 41034-021-21 Applications:- Z1 900
- H1 500
- H2 750
-
Out of stock
These NOS stands came from an older inventory. There was some small damage from poor shelf life, so they have been freshly powder coated. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Very nice front brake rotor, it is date coded 9A (1) Rotor 41080-001 (6) Replated Brake Rotor Bolts (3) 92088-014 Locks Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Very nice front brake rotor, it is date coded 0A (1) Rotor 41080-001 (6) Replated Brake Rotor Bolts (3) 92088-014 Locks Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
Out of stock
Very nice front brake rotor, it is date coded 9F (1) Rotor 41080-001 (6) Replated Brake Rotor Bolts (3) 92088-014 Locks Applications:- 1973-1975 Z1
- 1972-1975 H2
- 1972-1975 H1
-
GENUINE KAWASAKI Nicely Polished Hub with new Seal and Bearing. Kawasaki P/N: 42008-013 Includes: 601B6206 Bearing, 92050-027 Seal APPLICATIONS:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
-
Out of stock
Genuine Kawasaki - Used Polished, very nice kit. Kawasaki P/N's: 11022-005-2H Cylinder Head Cover Replaces 92003-092 Cam Cover Bolt Set Replaces 11023-006 Gasket Applications:- 73-75 Z1 900
- 76-77 KZ900
- Will work on 77-78 KZ1000
-
Left hand engine cover Contains Kawasaki P/N’s: 14031-053 Cover 14045-014 Gasket (New) OEM polished dyno cover, correct for Z1 / KZ 900 Will fit up to 1978 KZ 1000