- 73-75 Z1 900
-
This is a quality reproduction seat. Replaces Kawasaki P/N: 53001-076 Will fit other models with proper seat catch, but the stay bar will be in a different position. Applications: -
Out of stock
GENUINE KAWASAKI Nicely Polished Hub Notice no Rib in Webbing Kawasaki P/N: 42008-013 CORRECT FOR:- 1973 Z1 900
- 74-75 Z1 900
- 76-77 KZ900
-
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
Out of stock
This is a very nice polished, early edition clutch cover. Has some minor scratches from shelf life. This would be a perfect addition for your favorite bike. It is lighter in weight than the late model cover. We believe this is for 73-76 because of the thinner ribs on the inside. Applications:- 73-75 Z1 900
- 76-77 Kz900A
- 76 Kz900B LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 14032-082 cover (supersedes to 14032-121)
- 52015-004 oil gauge window
- 14046-024 gasket
-
Out of stock
This genuine Kawasaki cam cover has been vapor blasted and polished on the ends. Comes with 92003-092 cam cover bolts and 11023-006 gasket. Applications: Correct for:- 74-75 Z1 900
- 76-77 KZ900
- 73 Z1 900
- 77-78 KZ1000
-
Out of stock
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 13161-029 Applications:- 76-77 KZ900
- KZ900 LTD
- KZ900 Police
- 73-75 Z1900
- 78+80 Z1R
- 80 KZ1000G, Z1 Classic
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- Early KZ1000 Police
-
Out of stock
Freshly Powder Coated. Nice Genuine Parts. OEM Kawasaki P/N: 34011-029 Superseded P/N: 34011-1015 Contains the following Kawasaki P/N's:- 34011-029 Stand OEM powder coated
- 34023-012 Spring
- 34019-014 Bolt
- 92016-044 Nut
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1977-1980 KZ1000A
- Early KZ1000 Police
- 1980 Z1R
-
Out of stock
Quality, reconditioned polished part. Kawasaki P/N: 42006-062 Applications:- 76 KZ 900
-
Kawasaki P/N: 51001-1009-7V We bead blasted this tank to make sure it was able to accept emblems, as shown. Inside is nice, as shown. Outside has imperfections, as shown. Please keep in mind that the 78 KZ1000A takes a fuel valve that is held on with 2 bolts. Using the proper valve, this tank will fit: Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77 KZ1000A
- (Correct for a 78 KZ1000A)
-
Quality reproduction part Replaces OEM Kawasaki P/N: 44013-037 Set of 2 Fork Tubes Applications:- 76-77 KZ900A
- 76 KZ900 LTD
- 73-75 Z1 900
- 77 KZ1000 A
-
Out of stock
Our P/N: DC8-1 This coil set is 5-OHM Great for use with ignition with points. Wires available. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
- Will work on others
-
Our P/N:DC1-1 This coil set is 3-OHM Great for use with electronic ignition. Wires available. Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
- Will work on others
-
The DYNA S Electronic Ignition System was designed as a points replacement. Totally self-contained for easy installation. All components fit under the point cover, replacing the original points. It is designed for use with stock OEM, or other coils, or combinations of coils that have at least 3-ohms primary resistance. No more points to set! Our P/N DS2-1 Applications:- 73 - 75 Z1 900
- 76 - 77 Kz900
- 77 - 81 Kz1000
-
Out of stock
Mini coil set 3 OHM Dual, set of 2. This is the part we use on our Z1 900 and KZ1000 73-78 restorations. Will work on others. We also have wires and lower units in stock. -
Quality replacement part. Replaces Kawasaki P/N: 41080-001 Our P/N: MD4069LS Applications:- 73-75 Z1 900
- 72-75 H2 750
- 72-75 H1 500
-
Out of stock
Quality, reconditioned polished part. Kawasaki P/N: 42006-030-80 Applications:- 73 Z1 900