-
Replated OEM Part Kawasaki P/N: 92022-248 4.38mm thickness -
Quality reproduction part which replaces oil pressure sending unit boot, which Kawasaki does not offer separately. P/N: 11013 Applications:- 73-75 Z1 900
- 1976-77 KZ900
- 1977-78 KZ1000
- May fit others
-
NOS Clutch Cable Clamp. This is the guide that bolts to the triple clamp on the left side for the clutch cable. Kawasaki P/N: 92037-090 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 1980 KZ1000-G1 Classic
- 76-79 KZ750B
-
Quality Reproduction Made in U.S.A. Sold as shown (set of 3) Replaces OEM Kawasaki P/N: 92088-014 Applications:- 73 - 75 Z1 900
- 72 - 75 H2 750
- 72 - 75 H1 500
-
Replaces Kawasaki P/N: 92071-056 Sold as shown, set of 6. Applications:- KT250
- S2 350
- S3
- KH400
- 73-75 H1 500
- 76 KH500
- KZ550
- KZ650
- 73-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- 77-80 KZ1000 A
- 77-80 KZ1000 LTD
- KZ1000 POLICE
-
Out of stock
This is a replacement Turn Signal Stem. Can be used on front or rear. Long Stem is 3.75" (from base to end) Replaces Kawasaki P/N: 23078-001 Applications:- 76 KH 250-A5
- 73-75 S1B & C
- KH400 A3, A4, A5
- S3, S3A
- 73-75 H1D, E, F
- 76 KH500 A8
- 74-75 H2 B, C
- 76-77 KZ 750 B
- KZ 900, ALL
- Z1, ALL
- 77 KZ 1000A
- 77 KZ 1000B
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
Genuine Kawasaki ~ Used These parts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 41068-036 Applications:- 72-75 H1 500 B,D,E,F Mach III
- 72-75 H2 750 A,B,C Mach IV
- 73-75 Z1 900 A,B
-
Out of stock
Kawasaki Genuine Part ~ REPLATED Not all spacers will look the same Kawasaki P/N: 92026-108 Applications:- 74-75 Z1 900
- 76-77 KZ900A
-
Genuine Kawasaki ~ New Old Stock Kawasaki P/N: 92037-093 Applications:- KZ1000J
- KZ1000 Police
- KZ1000 Shaft
- KZ1000G
- Z1
- KZ650
- KX125
- KZ1300
- Many more
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 27010-1009 Sold as Shown Kit includes: 1) 46028-003 Horn Push Button 1) 46079-003 Contact 1) 46031-005 Spring Applications:- MT1
- H2 750
- H1 500
- KV 75
- F5
- KZ400
- Z1 900
- F9
- S2 350
- 77-78 KZ1000
- F6
- KZ650
- KZ900
-
Very nice high quality reproduction handlebar grips set for your favorite bike. Replaces Kawasaki P/N: 46061-012 APPLICATIONS:- 73-75 Z1 900
- 69-72 H1 500
- 72-73 H2 750
- 72-73 S2 350
- 73-73 S1 250
- 74-75 S3 400
-
Sold as a set of 2 with washers Very high quality reproduction part Made in the U.S.A. Replaces Kawasaki P/N's: 1) 92001-115 1) 110N0618 Screws Replaces Kawasaki P/N's: 1) 92022-195 1) 92022-125 Washers Our P/N: 35-115 Applications:- 76-77 KZ 900
- 73-75 Z1 900
- 1978 KZ 1000D Z1R
- 1977-1978 KZ1000
-
Out of stock
Set of (4) Quality Reproduction Gasket ~Sold as shown~ Applications:- 1973 Z1 900
- Early 1974
-
New Aftermarket Replaces Kawasaki P/N: 44009-024 Our P/N: FS-013 Applications:- 74-76 KX250
- KZ900 LTD
- KX400 A-2
- 76-77 KZ900A
- 73-75 H1 500
- 73-75 Z1
- 972 H1 500 (H1C)
- 77-80 KZ1000A
- 1976 KH500 A-8
- 77-80 KZ1000B LTD
- 72-75 H2 750
- 78&80 Z1R
- 76-79 KZ750B
- KZ1000G Z1 Classic
- Will fit others. Please check first*
-
Kawasaki P/N's: (2) 220B0408A Screw - Superseded P/N: 220B0408 (2) 44045-002 Washer Our P/N: 220B0408A Applications:- 1973-1975 Z1 900
- 1972-1975 H1 500
- 1972-1975 H2 750
- 1976-1977 KZ900A
- May work on others
