- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
-
Engine # KZT00AE035515. This is a low-mileage motor, never run hard. ~12,000 miles. No chrome, all polished. New piston rings, new gaskets. Rebuilt by our master mechanic, ready to plug in! Cylinder fins are all good, none broken. Studs are all good. (Handles shown will not come with this motor.) This belongs to our mechanic, Hilo. Give us a call if interested. Possible low-cost shipping upon request. We have a professionally-built crate for $200 to ship in, if you are interested. Call for shipping quote. 330-335-7365, or email info@johnnysvintagemotorcycle.com Will Fit: -
P/N: 12-55742 42mm Inlet 3 1/4" total length Applications:- 73-75 Z1 900
- Early KZ1000
-
This is the rear seat damper, takes 1 per motorcycle. New Old Stock Genuine Kawasaki P/N: 92075-099 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A & KZ1000B LTD
- May fit others
-
New Old Stock Genuine Kawasaki P/N: 13091-011 Applications:- 73-75 Z1 900 (takes 5)
- 77-78 KZ1000A (takes 5)
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 12011-002 Sold each. Applications:- 73-75 Z1 900 with stock valves
-
Quality reproduction part, made in Japan. Replaces OEM Kawasaki P/N: 16115-013 Includes 92055-049 O-Ring Applications:- 73-75 Z1 900
- 77-78 KZ1000
-
Quality set of 8 Clutch Plates Made in Japan Vesrah P/N: VC-162 Replaces OEM P/N: 13088-030 Applications:- 73-75 Z1
- 76-77 KZ900
- 80 KZ1000G
- 78 & 80 Z1R
- 77-80 KZ1000
- KZ650
- Will work on others
-
Quality reproduction BL 305, made in Japan. Replaces OEM Kawasaki P/N: 92045-021 Applications:- 73-75 Z1 900
- 77-78 KZ1000A
- Will fit others
-
Quality reproduction part. Replaces OEM Kawasaki P/N: 35022-071 Our P/N: 81-1185 Application:- 73-75 Z1 900
-
New Old Stock Genuine Kawasaki P/N: 12052-005 Superseded P/N: 12052-002 Applications:- 73-75 Z1 900
- 76 KZ900B LTD
- 76-77 KZ900A
- 77-80 KZ1000
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 12052-003 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- May fit other models and years
-
New Old Stock Genuine Kawasaki P/N: 12009-005 Applications:- 73-75 Z1 900
- 76 KZ900B LTD
- 76-77 KZ900A
- 77-80 KZ1000A and LTD
- May fit others
-
New Old Stock Genuine Kawasaki P/N: 12010-004 Applications:- 73-75 Z1 900
- 76 KZ900B LTD
- 76-77 KZ900A
- 77-80 KZ1000A and LTD
- May fit others
-
New Old Stock Genuine Kawasaki P/N: 12032-005 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-78 KZ1000
- May fit others
-
New Old Stock Genuine Kawasaki P/N: 12057-002 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-78 KZ1000
- May fit others
-
New Old Stock Genuine Kawasaki P/N: 92003-141 Applications:- 73-75 Z1 900
- 76-77 KZ900
- 77-80 KZ1000
- May fit others
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 28019-001 Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-78 KZ900A
- 77-80 KZ1000B LTD
- 74-75 H1 500
- 76 KH 500
- 74-75 H2 750
- May fit others
-
New Old Stock Genuine Kawasaki P/N: 92022-199 This washer is for the rear footrests. Sold each. Applications:- 73-75 Z1 900
- 72-75 H2 750
- 73-75 H1 500
- 76 KH500
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 34028-009 Superseded P/N: 34028-010 (Chrome) This kit was put together with NOS parts. Kit includes: 34028-009 Bar rear (2) 550D2012 Pin (2) 92076-024 Rubber (2) 92043- 079 Pin (2) 92022-199 Washer (2) Applications:- 73-75 Z1 900
- H2 750
- 73 and up H1 500
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 92003-100 Applications:- Correct for 73 Z1 900
- Will work on others
-
Quality replacement part Replaces OEM Kawasaki P/N: 13157-004 Applications:- Z1 900
- H1 500
- H2 750
- KZ1000
-
Out of stock
These are genuine Kawasaki parts that have been re-plated. OEM Kawasaki P/N: 33035-007 Applications:- 73-75 Z1 900
- 72-75 H2 750
- 69-75 H1 500
- 76 KH500
- Will fit some other models
-
Nice used part, great for un-restored bike. Genuine OEM Kawasaki P/N: 41085-004 Applications:- 1974-75 Z1 900
- 76-77 KZ900A
- 74-75 H2 750
- May fit others
-
New Old Stock Genuine Kawasaki P/N: 92042-028 Superseded P/N: 92043-1266 Applications:- 73-75 Z1 900
- 76-77 KZ900
- KZ1000
- KZ1100
- KZ1300
- KZ650
- Others
-
Set of 8 high-quality reproduction valve stem seals. MFR P/N: 14-6388 Replaces Kawasaki OEM P/N: 92049-016 Applications:- 73-75 Z1 900
- 76-77 KZ1000
- May fit others
-
New Kawasaki Genuine Part ~ New Old Stock\ Kawasaki P/N: 43030-003 Applications:- 1972 H2 750
- 74-75 H2 750
- 76-78 KH400
- 1976 KH500
- 1977 KZ1000 A1
- 1977 KZ1000 B1 LTD
- 76-78 KZ400
- 77-79 KZ650 B
- 77-79 KZ650 C Custom
- 76-79 KZ750
- 76-77 KZ900
- 73-75 Z1 900
-
New Old Stock Genuine Kawasaki P/N: 21061-019 Applications:- 1975 Z1 900B (903)
-
New Old Stock Genuine Kawasaki P/N: 51030-001 Applications:- 1973-75 Z1 900, Z1A, Z1B
- 1973-75 S1 250 Mach I S1A, S1B, S1C
- 1972-73 S2 350 Mach II S2A
- 1974-75 S3 400 Mach II, S3A
- 1972-73 F6 125 F6A F6B
- 1974-75 F11 250 F11A F11B
- 1976 KH250 A5
-
This is a short stand for a lowered bike. Used. Genuine Kawasaki P/N: 34024-038 Measures approximately 7.5" from center of bolt to base. Applications:- 1973-75 Z1 900
- 1976 KZ900A
- May fit others
-
Quality reproduction part from Doremi Collection of Japan. Replaces OEM P/N: 16054-005 Doremi P/N: 10127 Applications:- 73-75 Z1 900
-
New Old Stock Genuine Kawasaki P/N: 92001-115 Applications:- 73-75 Z1 900
- 76 KZ900A
- Z1 R
- Battery Box on Z1 900
-
Out of stock
Quality Japanese Parts Made by Daiichi Our P/N: 21008-027 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900 LTD
- 77-78 KZ1000A
- Others