- KZ400 B1, B2, C1, H1
- KZ440 A1, A2, A3, B1, B2, D1, D2, D4, D5, G1
-
Out of stock
New Old Stock. Zinc. Kawasaki P/N: 32032-1084 Applications: -
Out of stock
Nicely polished front hub. Kawasaki P/N: 41034-041 Contains the following Kawasaki P/N's: (1) 41039-028 Spacer (2) 601B203 Bearing (1) 654A254008 Seal (1) 481J400D Snap Ring Applications:- 1976-1977 KZ900A
- 1977-1978 KZ1000A
- 1976-1979 KZ750B
- KZ650B
- KH500
- KH400
-
Out of stock
Freshly powder coated Genuine Kawasaki P/N: 44037-1015 Kit includes: 44037-1015 clamp (1) 92003-064 Bolts (2) 461F 1200 Washer (2) Applications:- 80 KZ1000G Z1 Classic
- 79-80 KZ1000A
- 79-80 KZ1000 LTD
-
Out of stock
Genuine Kawasaki ~ Used Grab bar is in pretty good condition, chrome is pitted as shown, minimal rust Kawasaki P/N: 32109-1016 Applications:- 81-83 KZ650 H (CSR)
- 80-83 KZ750 H1 (LTD)
- 82 KZ750 M1 (CSR)
-
Out of stock
Kawasaki Genuine Part P/N: 35011-1090 Chrome is Nice Has some signs of wear but nice overall We have multiples of these in stock. Condition may vary, but all are nice. Applications:- 81-83 KZ440 LTD
- 81-83 KZ440 LTD Belt
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 92027-1177 Sold as shown Applications:- 79-80 KZ1000 LTD
- 80 KZ1000G (Z1 Classic)
-
Out of stock
Notice the taper on the rib which is correct for 1977-1978 KZ1000 Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-100-80 Cover 14045-014 Gasket (New) Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000B LTD
- 1978 KZ1000C Police
- 1978 KZ1000D Z1R
- Will fit others
-
Out of stock
Big dent on the left side, as shown. Shelf wear and scratches, as shown. Poor storage, as shown, on right side. Inside of the tank looks decent. Kawasaki P/N: 51001-109-3P Applications:- 1976 KZ400
-
Kawasaki P/N: 12037-022 Applications:-
1973-1975 Z1 900
-
1976-1977 Kz900A
-
1976 Kz900B Ltd
-
1977-1980 Kz1000A
-
1977-1980 Kz1000B Ltd
-
1978-1981 Kz1000C Police
-
1978 & 1980 Kz1000D Z1R
-
1979-1980 Kz1000E Shaft
-
1980 Kz1000-G1 Classic
-
1981-1983 Kz1000J
-
1981-1982 Kz1000K Ltd
-
1981-1982 Kz1000M CSR
-
1982-1983 Kz1000R Eddie Lawson Replica
-
1981-1983 Kz1100A Shaft
-
1981-1982 Kz1100B GPz
-
1982-1983 Kz1100D Spectre
-
-
Out of stock
All pages nice, clear and legible; pages showing discoloration due to age; some pages show marks/fingerprints but they do not interfere with the information. Page edges showing wear/dirt from use, handling and storage. Cover/Binding in place showing wear/dirt from use, handling and storage. Cover is coming apart along the spine, as shown. Print Date: January 1977 -
Spectro Dot 5 is what we us at Johnny's and we recommend because it is non-corrosive and will not attack paint work or other body surfaces. No overseas shipping on lubricants. Shipping in the 40 contiguous States only. -
Out of stock
Genuine Kawasaki ~ Used Kawasaki P/N's: 44039-1005 Upper 44037-1008 Lower 46012-008 Handlebar Holder 92007-002 Bolt Set 461F0800 Washers (in set) -
Out of stock
Vapor blasted in-house for that clean, genuine look. New bearings and oil seal. Kawasaki P/N: 41034-041 Applications:- 1976-1977 KZ900A
- 1977-1978 KZ1000A
- 1976-1979 KZ750B
- 1977-1979 KZ650B
-
Out of stock
Genuine Kawasaki ~ Used Kawasaki P/N: 51001-100 Applications:- 1974-1975 KZ400
-
Out of stock
Kawasaki P/N: 21070-005 SS P/N: 92057-1009 Applications:- 1981 KZ200 A1
- 1974 KZ400
- 1977-1978 KZ400 A1 A2
- 1978-1979 KZ400 B1 B2
- 1975-1977 KZ400 D D3 D4
- May fit others
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23028-019 Applications:- 74-75 F7-C, F7-D
- 74-75 F9-B, F9-C
- 74-75 G3SSD, G3SSE
- 74-75 G4TR-D, G4TR-E
- 76-79 KE125-A3 to A6
- 76-78 KE175-B1 to B3 (KE175)
- 77-79 KE250-B1 to B3
- 76-77 KH100-B7, B8
- 78-79 KL250-A1, A2 (KLR250)
- 76-81 KM100-A1 to A7
- 74-75 KS125, KS125-A
- 1976 KV100-A7
- 74-78 KZ400, KZ400-A1 to A2
- 78-79 KZ400-B1 to B2
- 1978 KZ400-C1
- 75-77 KZ400-D, D3, D4
- 75-77 KZ400-S, S2, S3 (Special)
- 80-81 KZ440-B1, B2
- 74-75 MC1-A, B
- May fit others