- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
- 78 & 80 KZ1000D Z1R
- 79-80 KZ1000E SHAFT
- 1980 KZ1000-G1 CLASSIC
-
Out of stockGenuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:
- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
Out of stockKerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 127-61001 Applications:
- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Out of stockNew Old Stock Genuine Kawasaki P/N: 42041-171 Could use a little cleanup. Applications:
- 76 KZ900B (LTD)
-
Out of stockQuality re-plated part. Contains OEM Kawasaki P/N: 53011-008 (Seat pin) 92041-003 (Cotter pin) Applications: Each bike takes 2 each
- 73-75 KZ900
- KZ900 LTD
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- May fit others
-
Genuine Kawasaki Parts ~ Used This is correct for 1975 Z1 900 (Shift pattern numbers were stamped smaller) but will work on 1974 and up. Great part for the restored bike. Includes Kawasaki P/N:
- 14026-026 Chain Cover (1)
- 14026-012 Inspection Cover
- 14045-012 Gasket
- 220B0612 Screws (2)
- 74-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900 LTD
-
Nice used camshaft set. Genuine Kawasaki P/N's: 12044-014 Intake 12044-015 Exhaust Applications:
- Correct hollow shaft for 1973 and Early 1974 Z1
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:
- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
New Kawasaki Genuine Shim ~ New Old Stock Kawasaki P/N: 12037-015 Applications:
- 73-75 Z1 900
- 76-77 Kz900A
- 1976 Kz900B Ltd
- 77-80 Kz1000A
- 77-80 Kz1000B Ltd
- 78-81 Kz1000C Police
- 78 & 80 Kz1000D Z1R
- 79-80 Kz1000E Shaft
- 1980 Kz1000-G1 Classic
- 81-83 Kz1000J
- 81-82 Kz1000K Ltd
- 81-82 Kz1000M CSR
- 82-83 Kz1000R Eddie Lawson Replica
- 81-83 Kz1100A Shaft
- 81-82 Kz1100B GPz
- 82-83 Kz1100D Spectre
-
Out of stockQuality powder coated part. Has some minor pitting, as shown. OEM Kawasaki P/N: 32100-020 Includes NOS rubber grommets:
- P/N: 92071-056
- P/N: 92075-078 (2)
- 76-77 KZ900A
- 76 KZ900 LTD
-
Out of stockKerker 4-into-1 system offers improved horsepower and performance. Reduced weight and increased cornering clearance compared to stock system. Kerker P/N: 128-61001 Applications:
- 73-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
- 77-80 KZ1000A
- 77-80 KZ1000B LTD
-
Out of stockNew Old Stock Kawasaki P/N: 25008-045 Superseded P/N: 25008-039 Application:
- KZ900
- KZ900 LTD
- 77-78 KZ1000A
- 76-79 KZ650
- KZ750B
- Will fit others
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:
- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
Manufactured by ANNY in Japan. Lightweight, made out of titanium. Each pipe weighs only 4 lbs. These are prototype pipes, that have been run for about 500 miles. They produce a very nice sound. Bottom left pipe has a very tiny ding, as shown. See video below as we demonstrate these pipes on a customer’s 76 KZ900. (Bike is not for sale.) These retail for $4,000. Applications: 73-80
- Z1 900
- KZ900 LTD
- KZ1000 LTD
-
Out of stockQuality re-plated original part. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-1265 Applications:
- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Out of stockGenuine Replated Kawasaki Part Head: Plain with stamped dot Kawasaki P/N: 113B1256A Applications:
- 73-75 Z1900
- 76-77 KZ900A
- 76 KZ900 LTD
- 80 KZ1000G Classic
- 79-80 KZ1000 Shaft
- Z1R
- 77-80 KZ1000