- KZ1000 A2, A2A
- KZ1000 C1A, C2, C3
-
We recommend Pingel Fuel Valves for every restoration we do. Kit made from quality reproduction parts. Replaces Kawasaki P/N: 51023-1006 Superseded P/N: 51023-1018 Our P/Ns: A1703C Adapter Plate, 3311-D-AH Fuel Valve Applications: -
Out of stock
Genuine Kawasaki - Used Polished, very nice kit. Kawasaki P/N's: 11022-005-2H Cylinder Head Cover Replaces 92003-092 Cam Cover Bolt Set Replaces 11023-006 Gasket Applications:- 73-75 Z1 900
- 76-77 KZ900
- Will work on 77-78 KZ1000
-
Out of stock
Notice the taper on the rib which is correct for 1977-1978 KZ1000 Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-100-80 Cover 14045-014 Gasket (New) Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000B LTD
- 1978 KZ1000C Police
- 1978 KZ1000D Z1R
- Will fit others
-
Out of stock
Quality powder coated center stand. Replaces Kawasaki P/N: 34011-1004KIT Kit consists of:- (1) 34011-1004 Main stand
- (1) 34023-012 Spring
- (2) 34019-014 Bolts
- (2) 92016-044 Nuts
- 73-75 Z1 900 (With 4-into-1 header)
- 77-78 KZ1000A (With 4-into-1 header)
- 78 Z1R
-
Nice used camshaft set, includes sprockets and bolts, as shown. Genuine Kawasaki P/N's: 12044-014 Intake- Superseded from 12044-004
- Superseded from 12044-005
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)
-
Serial # KZT00AE005205 Cases are in nice shape. No damage or broken bolts. Some corrosion. Will clean up. Applications:- Correct for 1977
- Will work with others.
-
Brake hub assembly, restored with new bearings, seal and polish job.. Chrome has some very minor pitting, as shown. Applications:- 77-78 KZ1000A
-
Out of stock
Nice chrome cover came from an older inventory we purchased. We estimate the chrome is about 20 years old. Very nice shape. OEM Kawasaki P/N: 14026-039-80 Comes with P/N: 14026-012 Chain oiler cover, as shown. Applications:- 77-78 KZ1000A
- 78 Z1R
- 77-78 KZ1000B (LTD)
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 25005-1067 Applications:- 1980 KZ1000G (Z1 Classic)
- KZ1000A (MKII)
- KZ1000B (LTD)
-
Out of stock
Fork outer tubes have been brush polished. Set includes:- 44005-063 LH Outer Tube
- 44006-061 RH Outer Tube
- 44009-024 Fork Seals
- 44010-032 Dust Shields
- 220B0408A Screws
- 44045-002 Seals
- 76-77 KZ900A
- 76 KH500
- 77 KZ1000A
- 76 KZ900 LTD
- May fit others
-
Genuine Kawasaki, reconditioned Kawasaki P/N: 43041-1013 Applications:- 1980 KZ1000D Z1R
- 1979-1980 KZ1000A MKII
- 1979-1981 KZ1000C Police
-
Out of stock
Brush finish. Set of 2. Some have lower bracket as shown for fender brace, and some do not. Kawasaki uses the same part number for both versions. Consists of:- 1) 44005-1001 Left Hand Outer Tube
- 1) 44006-1001 Right Hand Outer Tube
- 2) 220B0408A Screws
- 2) 44045-002 Drain gaskets
- 2) 44049-024 Fork seals
- 2) 44010-032 Dust shields
- 2) 44043-044 Washers
- 2) 44044-012 Circlip
- 78 KZ1000A
- 77-80 KZ1000 LTD
- 80 KZ1000G, Z1 Classic
- 78-79 KZ750B
- 78-79 KZ650B
-
Out of stock
Kawasaki P/N: 13031-1006 This one-year-only crankshaft is in nice shape. Rods and bearings feel good. No flywheel key. 10mm rotor bolt. Applications:- 78 KZ1000A
- 78 KZ1000 LTD
- 78 Z1R
-
Used KZ1000 crankcase with no damage. Bottom only with shift drum ad shift fork. Kawasaki P/N: 14001-107-2J Application:- 77-78 KZ1000
- May fit others
-
Nice used crankshaft. Kawasaki P/N: 13031-056 Applications:- 77 KZ1000A
- KZ1000 LTD