- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- May fit others
-
Good quick fix for meters that have been dented, or flaking Our P/N: 58-12410 Applications: -
Includes P/N 25012-023 Speedometer Cover 25012-024 Tachometer Cover Our P/N: 58-85100 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- KZ1000 77-78
- Z1 900 73-75
- May fit others
-
Genuine Kawasaki Part Length 31mm Collars have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 92027-160 -
This is sold as a kit. The Cam Cover was vapor blasted and the ends were polished. The Cam Cover Bolts are chrome and we had them made here in Ohio. Contains the following Kawasaki P/N's: 11022-012-2H Cam Cover 92003-092 Cam Cover Bolts 11023-006 Cam Cover Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- KZ1000 Police
- 73-75 Z1900
- KZ900A
- KZ900B LTD
- 78 Z1R
-
Out of stock
K&N delivers a race-spec oil filter which is built with a high-efficiency media specifically designed to withstand the high concentrates of synthetic racing oils. Replaces Kawasaki P/N: 16099-003 K&N P/N: KN-401 -
Out of stock
Genuine Kawasaki Part ~ Freshly powder coated Kawasaki P/N: 46094-019 Applications:- 77-80 KZ 1000 A
- 77-80 KZ 1000 LTD
- 78-81 KZ 1000 C
- 78-80 KZ 1000 D Z1R
- 76-79 KZ 750 B
- 77-79 KZ 650
- Will fit others
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
Genuine Kawasaki Part Kawasaki P/N : 92016-045 Applications:- 73-75 Z1 900
- 77-80 KZ1000 LTD, Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1980 KZ1000G (Z1 Classic)
- 78 & 80 Z1R
- 79-80 KZ1000E
- 77-80 KZ1000A
- Early KZ1000 Police
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Out of stock
Notice the taper on the rib which is correct for 1977-1978 KZ1000 Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14031-100-80 Cover 14045-014 Gasket (New) Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000B LTD
- 1978 KZ1000C Police
- 1978 KZ1000D Z1R
- Will fit others
-
Out of stock
Genuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Carburetor Holder Set - Left & Right Quality Made Reproduction Part Replaces Kawasaki P/N's: (2) 16065-028 Right (2) 16065-029 Left (4) 92068-006 Rubber Plug Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900 All
- 1977-1980 KZ1000 All
-
Quality Reproduction Grab Rail with Hardware Kawasaki P/N: 35032-022 (10276) Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
-
Out of stock
Set of 2 Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23019-022 Applications below -
Made in Japan 219Hx122 Replaces Kawasaki P/N: 21070-003 Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1977-1978 KZ1000 Police
- 1978 Z1R