- 1976-1977 KZ900A
- 1976 KZ900 LTD
- 1977-1980 KZ1000 LTD
- 1977-1980 KZ1000A
- 1976-1979 KZ750B
- Early KZ650
-
VIN #: KZT00A514747 ENG #: KZT00AE057797 16805 miles Dyna ignition top and bottom, Ricks Electric regulator/rectifier, new master cylinder, new brake lines, correct date-coded rims, original seat, new air filter, new air box rubbers, cleaned carburetor, new fuel Ts, needles, seats, float gaskets, top cover gaskets, Pingel fuel valve, rebuilt carburetors, valves re-shimmed, stock air box, powder coated center stand, new side cover grommets, rear sprocket lock tabs, complete front brake system has been redone using DOT 5 fluid. New throttle cable, new brake light switch, oil and filter change, original lion’s head key, manual tray, owners manual, original grips, original fenders. Clamp that holds air box to the silencer is not genuine, but is stainless. Mirrors are reproduction. Tank has a dent on the center of the right side, as shown. Possibly could be fixed. Tires are original Bridgestone raised white letter but we are considering replacing them with more modern Kenda tires. Has Manley cam covers, as shown. Reproduction mirrors. This bike came with a Kerker header, so we replaced it with a hard-to-find exhaust we had in stock which has road-rash as shown, but this motorcycle does not have crash damage! Runs nice. we set this up as a very original every day rider. Everything works. No smoke. Possible low-cost shipping available upon request.
-
Out of stockNicely polished Front Sprocket Cover with Clutch Inspection Cover. Genuine Kawasaki, Used Kawasaki P/N: 14026-1017 Applications:
- 1979-1980 KZ1000A MKII
- 1979-1980 KZ1000B LTD
- 1979-1981 KZ1000C Police
- 1980 KZ1000D Z1R
-
Out of stockMotor# KZT00AE079317 We are selling this rebuilt engine for our mechanic, Hilo. Mark II style head, 79 or 80 KZ1000 LTD. This motor has been down to the bare cases. First-over pistons. Everything is nice. Valve job, clutch is good. There is some pitting on the engine case on the top as shown. Motor cases have been vapor blasted. All new seals, gaskets, oil window brand new. No welding, no broken fins. Bolts and hardware have been replaced. all exhaust studs are nice, tachometer drive is nice. This is basically a nice, plug-in motor. A screw on the side has been repaired and there is a small hole, as shown. Does not have an ignition system in it. There is nothing broken, no broken fins. We have everything in stock to finish this motor. Applications:
- 73-75 Z1 900 chassis
- Up to 1980 KZ900, KZ1000.
- 79-81 KZ1000 Police Bike.
-
Out of stockGenuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Out of stockGenuine Kawasaki P/N: 41080-005 Great for the everyday rider. Edges could use a little clean-up. Black areas have been touched up. Date stamped: 1D Kit includes:
- (1) 41048-005 Rotor
- (4) 92001-158 Bolts
- (2) 92088-023 Lock washers
- 76-77 KZ900A
- 76 KH500
- 77-78 KZ1000A
- 77-79 KZ650B
- 76-79 KZ750B
- May fit others
-
Out of stockGenuine Kawasaki P/N: 41080-005 Great for the everyday rider. Edges could use a little clean-up. Black areas have been touched up. Has small dings on flange, as shown. Date stamped: 2L Kit includes:
- (1) 41048-005 Rotor
- (4) 92001-158 Bolts
- (2) 92088-023 Lock washers
- 76-77 KZ900A
- 76 KH500
- 77-78 KZ1000A
- 77-79 KZ650B
- 76-79 KZ750B
- May fit others
-
Out of stockGenuine Kawasaki P/N: 41080-005 Great for the everyday rider. Edges could use a little clean-up. Black areas have been touched up. Date stamped: ON Kit includes:
- (1) 41048-005 Rotor
- (4) 92001-158 Bolts
- (2) 92088-023 Lock washers
- 76-77 KZ900A
- 76 KH500
- 77-78 KZ1000A
- 77-79 KZ650B
- 76-79 KZ750B
- May fit others
-
Out of stockQuality reproduction part Replaces OEM P/N: 43015-1009 Applications:
- 77-79 KZ650B
- 78-79 KZ650C Custom
- 78-79 KZ650D
- 79-80 KZ1000A
- 78-80 KZ1000B LTD
- 78-80 KZ1000C Police