- 1969-1971 H1 500
- 1967-1971 A1 All
- 1967-1971 A7 All
-
Out of stock
Genuine Kawasaki SM-2 Factory Service Manual Includes supplement for CDI Ignition The front cover shows some wear and tear and staining. There are a few small tears on the front cover, as shown. There are grease stains and other stains here and there from use. The last pages (a couple of wiring diagrams and the supplement) are stuck together. We did not try to "un-stick" them, as we did not want to cause more damage. The last page of where the supplement is appears to have been ripped. The rear cover is also stained, and has a few tears, as well. Good, complete manual. You will want to reinforce the holes on a couple of pages and stick them back into the binder. This manual has its challenges, but if you need a manual for these motorcycles, this is it. (if you need the supplement, take apart at your own risk) This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repairs. Kawasaki Manual P/N: 99995-212 Print Date: 1970 (says reprint) Models Covered: -
New Old Stock Genuine Kawasaki P/N: 55044-001 Application:- KZ400 A1, A2
-
New Old Stock Genuine Kawasaki P/N: 51069-502 Applications:- 87-91 JS 300 A1-A5
- 87-89 JS 440 A1, A10-A16
- 82-85 JS 550 A1-A8
- Others
-
New Old Stock Genuine Kawasaki P/N: 59016-532 Applications:- JS400 A1-A14
- JS440 A1-A8
- JS550 B1
-
New Old Stock Genuine Kawasaki P/N: 92027-034 Applications:- 69-72 H1 500
- Will work on A1 A7 and more
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 92090-014 Applications:- A1
- A1SS
- A7
- A7SS
-
This New Old Stock foot peg has been refreshed with powder coating. Genuine Kawasaki P/N: 34003-001 Superseded P/N: 1014544 Applications:- 69-71 A1 A1SS 250
- 69-71 A7 A7SS 350
-
Sale!
New Old Stock Genuine Kawasaki P/N: 41042-016 Applications:- 76-78 KH400 A3-A5
- 1976 KH500 A8
- 77-78 KZ1000 A1-A2, A2A
- 78-79 KZ400 B1-B2
- 77-79 KZ650 B1-B3, B2A
- 1980 KZ650 E1 (LTD)
- 1980 KZ650 F1
- 76-79 KZ750 B1-B4
- 1980 KZ750 G1 (LTD II)
- 76-77 KZ900 A4-A5
- KZ900 Police
-
New Old Stock Genuine Kawasaki P/N: 13072-006 Superseded P/N: A1010-3465 Applications:- H1 500
- H2 750
- KH 500
- Will work on others
-
Out of stock
This manual is designed primarily for use by motorcycle mechanics in a properly equipped shop, although it contains enough detail and basic information to make it useful to the motorcycle user who desires to carry out his own basic maintenance and repair work. Kawasaki Manual P/N: 99924-1048-03 Printed in Japan Print Date: 1984, 1986, 1988 (Third edition) Pages: (20 Sections) CONDITION: USED. SEE PICTURES All pages nice, clear, and legible; light discoloration; may have some light fingerprints, smudges, marks, handwriting; edges show some wear or dirt from use, handling, or storage. Cover and binding in place showing some wear or dirt from use, handling, or storage. Models Covered:- 84 ZX900-A1
- 85 ZX900-A2
- 86 ZX900-A3
- 87 ZX900-A4
- 88 ZX900-A5
- 88 ZX900-A5A
-
New Old Stock Genuine Kawasaki P/N: 13068-009 Applications:- 66-71 A1
- A1SS
- A7
- A7SS
-
New Old Stock Genuine Kawasaki P/N: 13060-017 Applications:- KZ400 A1, A2
- KZ400 D, D3, D4
- KZ400 S, S2, S3
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 46109-003 Superseded P/N: 46109-012 Applications:- 69-73 G3SS
- 69-71 G3TR
- 68-70 F3, F21M
- F2, F2TR
- 69-70 F4
- 66-71 A1SS, A7SS
- 67-69 C2SS, C2TR
- H1 R
-
New Old Stock Genuine Kawasaki P/N: 51032-001 Applications:- 71-73 F6
- 68-70 F3
- 69-70 F4
- 71-72 F8
- 71 F81M
- 66-70 W1 SS, W2SSTT
- F21M
- F1, F2
-
Quality reproduction part Replaces Kawasaki P/N: 13144-036 16T Applications:- A1
- S1
- KH400
- S3
- H1
- KH 500
- H2
-
Out of stock
Quality reproduction part Replaces Kawasaki P/N: 13144-030 13T (2 Tooth less than stock) Applications:- A1
- S1
- KH400
- S3
- H1
- KH 500
- H2
-
Quality reproduction part Replaces Kawasaki P/N: 13144-030 12T (3 Tooth less than stock) Applications:- A1
- S1
- KH400
- S3
- H1
- KH 500
- H2
-
New Old Stock Genuine Kawasaki P/N: 92091-003 Superseded P/N: A1020-1313 183mm Applications:- A1 SS
- A7 SS
- May work on others. *Please check first*
-
New Old Stock Genuine Kawasaki P/N: 92091-002 Superseded P/N: A1020-1312 Applications:- A1 SS
- A7 SS
- 76 KH 250
- 73-75 S1 250
- 72-73 S2 350
- 74-75 S3 400
- 76-77 KH 400
- May work on others. *Please check first*
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 54017-1059 Applications:- 85 VN 700 A1 Vulcan
- 86-93 VN 750 A2-A10 Vulcan
-
Sale!
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 54005-3501 Applications:- SS 340-A1
- SS 440-A1
- ST 440-A1
-
New Old Stock Genuine Kawasaki P/N: 92001-071 Applications:- A1
- A7
- Early H1
- F21M
- F4
-
VIN #: 7A15679H3 Cylinder measures 56mm. Has scratches. Chip on top of cylinder. Use oversized piston for perfect use, but would work as-is. Engine cases have glue on bottom, as shown in photos. Crankshaft appears good. Possible low-cost shipping available. SOLD AS SHOWN - NO RETURNS See video for further description. Location: Farm -
New Old Stock Genuine Kawasaki P/N: 21061-005 Replaces P/N: A1010-8170 Application:- A1, A7
-
New Old Stock Genuine Kawasaki P/N 21119-1015 Application:- 1980 KDX175-A1
-
Out of stock
Quality re-plated original part. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-1265 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
We recommend Pingel Fuel Valves for every restoration we do. Kit made from quality reproduction parts. Replaces Kawasaki P/N: 51023-1006 Superseded P/N: 51023-1018 Our P/Ns: A1703C Adapter Plate, 3311-D-AH Fuel Valve Applications:- KZ1000 A2, A2A
- KZ1000 C1A, C2, C3
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 21088-010 Set of 2 Applications:- A1
- A7
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23026-017 Applications:- 67-68 A1 Samurai
- 67-71 A1 250
- 67-71 A7 Avenger 350
- 67-69 C2 Roadrunner 120
- Early W1 W2 650
-
New Kawasaki Genuine Parts ~ New Old Stock We made this kit using NOS parts in our inventory. This is the original pivot pin with cotter pin. Some models use them for the seat hinge and latch, some for the seat hinge only. Please be sure to order one kit each for every application. *some models require 3 kits. Be sure to order what you need! This kit is absolutely necessary to complete your restoration! Kit includes: (1) Hinge pin P/N: 53011-001 (1) Cotter pin P/N: 550D2015 Applications:- F3 Bushwhacker
- F4 Sidewinder
- A1SS, A7, A7SS
- 69-72 H1 500
- MC1
- KD80
- Will work on many others. Please check first.
-
New Old Stock Genuine Kawasaki P/N: 13129-1147 Superseded P/N: 13129-1642 Applications:- 80-81 KE100 A9-A10
- 82-84 KE100 B1-B3
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 53011-1122 Applications:- 83 ZX750 A1
- 83 ZX1100 A1
-
New Old Stock Genuine Kawasaki P/N: 13129-014 Applications:- A1
- A1SS
- A7SS
-
New Old Stock Genuine Kawasaki P/N: 92056-001 Applications:- A1
- A7
-
New Old Stock Genuine Kawasaki P/N: 16022-010 Applications:- 73-75 Z1 900
- 76-77 KZ900
- A1 All
- A7 All
- KZ750B
- W1
- W2
- Z1R
- 77-80 KZ1000
- Many others
-
Genuine Kawasaki~ New Old Stock Kawasaki P/N: 92052-005 Applications:- A1SS, A1, A7SS, A7
- 72-73 S2 350
- S1
- KH250
- S3
- KZ400
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 16115-002 Applications:- 72-75 H2 750
- A1-A7
- D1
- J1
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92001-1055 Sold as Shown (set of 2) Scroll down for applications -
Out of stock
New Old Stock Kawasaki P/N: 92075-1060 Applications:- 78-82 KX125
- KDX175 A1-A3
- KDX250 A1, B1
- KX250 A4-A7
- KDX400 A1, A2
- KDX420 B1
- KX420 A1, A2
- KDX450 A1
-
REPRINT Provides instructions for proper use, so you can always enjoy its best performance. Catalog No: 99995-312-01 CONDITION: New - Reprint PAGES: 36 PRINT DATE: 1970 Models Covered (Seller presumes by print date year covered is 1971)- GA1-A
- GA2-A
- G3SS-A
- G3TR-A
-
Quality Reproduction part Our P/N: 27-3561 Kawasaki P/N: 46092-1117 Applications:- 85-87 ZX600 A1-A3 Ninja
- 86-87 EX250 E1-E2 Ninja
- 86-91 ZG1000 A1-A6 Concours (A4 Canada 1989)
- 86-87 ZX1000 A1-A2 Ninja
- 87-91 EX500 A1-A5
- 87-97 ZX600 B1, C1-C10 Ninja
- 87-90 ZX750 F1-F4 Ninja
- 88-89 EL250 B2-B3 Eliminator
- 91 EL250 E1-E4 Eliminator
- 88-05 EX250 F2-F4, F6-F19 Ninja
- 06-07 EX250 F6F-F7F Ninja
-
Out of stock
Kit Includes Kawasaki P/N: (2) 92081-027 oil tank pipe holder (1) 92059-021 oil tank pipe Applications:- A1
- A7
- 69-71 H1 500
- 72 H1 C
- May work on others
-
Kawasaki P/N: 46100-001 We believe this to fit:- 69-71 H1
- 72 H1C
- A1
- A7
-
Out of stock
Kawasaki P/N: 92005-002 Applications:- Z1
- H2
- A1
- KZ900
- Many more!
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92022-076 Previous P/N: A10103629 Sold as a set of 4 (Some Applications Use 5 Washers) Applications:- 69-73 H1
- 72-73 H2
- 70-71 F5
- A1
- A1SS
- A7
- A7SS
- May fit others
-
Kawasaki P/N: 21007-1003 Applications:- 71-73 G3SS
- A1
- A1SS
- A7
- A7SS
- 72-74 F9
- 76-78 KE175
- C2SS
- C2TR
- 71-75 G4TR
- Will fit many other models & years
-
Kawasaki P/N: 92031-001 Applications:- 69 A1
- 69-75 H1
- 72-75 H2
- KZ750 B
- Z1
- KZ900
- KZ1000
- Teryx 750
- VN1700 Vulcan
- May fit others
-
Kawasaki P/N: 92043-016 (Pin) 92031-001 (Washer-lock) Bolts are brand new, and have been cadmium plated Applications:- 69 A1
- 69-75 H1
- 72-75 H2
- KZ750 B
- Z1 900
- KZ1000
- Teryx 750
- VN1700 Vulcan