- 69-71 H1 500 Mach
- A1 250 Twin
- A7 350 Twin
- W1 650
- W2 650
- 71-72 F6 125
- 71-72 F7 175
- 68-70 F3 175 Bushwacker
- 69-70 F4 Sidewinder
- 1971 F8 Bison
- 1970 F5 Bighorn
- 1972 F9 350
-
New Aftermarket Replacement Lens Replaces Kawasaki P/N: 23026-010 Kawasaki Replacement Gasket P/N : 23028-008 Applications: -
Quality re-plated OEM part. Kawasaki P/N: 92004-048 As these have been re-plated, they may not all look the same. Applications:- KZ650
- KZ750
- KZ900
- Z1900
- 77-80 KZ1000
-
Kawasaki Genuine Part ~ Used Kawasaki P/N: 41078-008 Kit Includes:- 41062-005 Speedometer Cable Bushing
- 41063-001 Thrust Washer (2)
- 41060-017 Speedometer Pinion
- 41082-001 Spring Pin
- 41064-013 Speedometer Gear Receiver
- 654A304208 Oil Seal
- 41059-028 Speedometer Gear
- KH400
- KH500
- KZ650
- KZ750 B 76-79
- KZ900 76-77
- KZ900 LTD
- KZ900 Police
- KZ1000 A 77-78
- KZ1000 LTD 77-79
- *May Fit Others*
-
Side Cover Emblem Nut Lock, 3mm Exact replica of original Kawasaki P/N: (2) 92018-005 Our P/N: (10036) Applications: See below -
Quality reproduction part made in Japan. Replaces Kawasaki P/N: 34019-014 Kit consists of:- (2) 34019-014 Bolts
- (2) 92016-044 Nuts
- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- 78 Z1R
-
Quality reproduction part. Replaces Kawasaki P/N: 92074-006 Applications:- Z1 900
- KZ900A
- 74-75 H2
- KZ650
- Many others
-
New Old Stock, includes: Kawasaki P/N: 92081-020 Spring P/N: 600A0600 Ball Applications:- Z1 900
- KZ900
- H1, H2
- KX420
- S3
- A7, A1
- KZ1000
- Many others
-
Quality re-manuactured part made in the U.S.A. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-126 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
Kawasaki Genuine Part ~ Used (Replated) Kawasaki P/N: 42036-015 Sold as shown Applications:- 76-77 KZ900A
- 73-75 Z1900
- Z1 Police
- KZ900 Police
-
Replaces Kawasaki P/N: 113B1256A Superseded P/N: 92001-1262 Replated part - each may look different Applications:- 73-75 Z1
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ1000 G (Z1 CLASSIC)
- 79-80 KZ1000 SHAFT
- 78 & 80 Z1R
- KZ1000 Police (Early)
- 77-80 KZ1000 LTD
- 77-80 KZ1000 A
-
New Old Stock Kawasaki P/N: 23019-021 Applications:- 77-82 KZ1000
- 74-78 S2 KH400
- 1976 KH500
- 69-75 H1 500
- 72-75 H2 750
- 73-75 Z1900
- W1
- W2
-
New Old Stock Genuine Kawasaki P/N: 92092-006 Applications:- KV75
- MT1
- G3SS
- G3TR
- KH100 B7 and B8
- C2SS
- C2TR
-
Quality Reproduction Part Replaces Kawasaki P/N: 56018-261 Kit contains both left and right emblems Lock nuts P/N: 92018-005 Application:- 77-78 KZ1000A
-
Quality Reproduction Part Replaces Kawasaki P/N: 56014-049 Manufacturers P/N: KFR17-93700 Kit Contains: (1) 56014-049 right emblem (1) 56013-054 left emblem (4) 92012-003 screws Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- *May Fit Others
-
Out of stock
Genuine Kawasaki ~ Reconditioned OEM Part Hex head style. Kawasaki P/N: 33032-036 Correct for:- 74-75 Z1 900
- 76-77 KZ 900 A
- 1976 KZ 900 LTD
- 77-80 KZ 1000 (all)
- 1973 Z1 900
-
Kit includes:- (2) 92043-080
- (2) 550D2515
- 73-75 H1
- 73-75 Z1
- 78 Z1R
- 76-77 KZ900
- 77-79 KZ1000A
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 92037-071 Application:- 72-73 H2 750
-
NOS Kawasaki Kawasaki P/N: (4) 92012-003 Applications:- Z1 900
- KZ400, KZ440
- KZ550, KZ650,
- KZ750, KZ1000,
- KZ1100, KZ1300
-
Quality replacement part. Kawasaki P/N: 92075-176 Applications:- 73-75 Z1 900
- 76-77 KZ900A
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 92091-024 Applications:- 69-75 H1 500
- 76 KH 500
- 72-75 H2 750
-
Set of 2 Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23020-017 Applications:- 72 H2 750 Engine # 02685 and down
- 72 S2 350
- 74-75 F9 350
- 74-75 F7 175
-
Kawasaki replacement P/N: 92076-024 Set contains:- (2) 92076-024 footrest rubber
- (2) 34028-010 footrest bar
- (2) 33028-011 footrest bracket
- Z1 900
- 76-77 KZ900A
-
Fender Washers 7mm Bag of 10 Kawasaki P/N: 92022-228 Our Part# 35-228 Applications:- 73-75 Z1 900
- 76-77 KZ 900
- 77-79 KZ 1000
- 73-75 H1 500
- 74-75 S3 400
- many others
-
Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 23050-003 Sold each Applications:- 73-75 H1 500
- 1976 KH500
- 74-75 S3 400
- 76-78 KH400
- 72-73 S2 350
- 73-75 S1 250
- 1976 KH250
- 73-75 F11
- 71-73 F6 125
- 71-75 F7 175
- 72-75 F9 350
- 70-72 G3SS
- 70-75 G4TR
- 72-75 G5
-
NOS Kawasaki P/N: 34006-002 Sold as set of 2 springs -
Kawasaki new old stock Kawasaki PN: 23050-002 Applications:- Z1 900 73-75
- H2 750 72-75
- KZ 900 LTD REAR
- KZ 1000A 77-78
- KZ 900A 76-77
- KZ 750B
- KZ 650
- Many others
-
Genuine Kawasaki Part Length 31mm Collars have been re-plated, so they will not all look exactly 100% the same. Kawasaki P/N: 92027-160 -
Genuine Kawasaki ~ New Old Stock Kawasaki P/N: 33044-001 Applications:- 74-75 H2 750
- 73-75 Z1 900
- 76-77 KZ 900
- 1976 KZ 900 LTD
- 77-80 KZ1000 (All)
- *will fit others*
-
Kit consists of:- 2) 46012-008 Holders, fresh powder coat (select finish)
- 4) 92007-002 Bolt
- 4) Washers
- 73-75 Z1 900
- 76-77 KZ 900
- 76 KZ 900 (LTD)
- 77-80 KZ 1000
- 77-80 KZ 1000 (LTD)
- 72-75 H1 500
- 69 H1 500 (MACH III)
- 72 H2 750 (MACH IV)
- 74-75 H2 750 (MACH IV)
- 73-75 F11
- 71-73 F6
- 71-75 F7
- 71-72 F8
- 72-75 F9
- Many others
-
New Old Stock Kawasaki P/N: 23028-018 Applications:- 73-75 Z1900
- 74-75 H2
- S3
- KH400
- KE100
- F11
- Will fit others
-
New Old Stock Genuine Kawasaki P/N: 92050-009 Applications:- 70 F3 (Bushwhacker)
- 71-73 F6
- 71-73 F7
- 70-71 G31M (Centurion)
- 75-76 KT250
- B8
- B8S
- B8T
- F1
- F1 TR
- F2
- F2 TR
-
Out of stock
Quality replacement parts Set consists of:- (1) 24028-011 left footrest
- (1) 34028-012 right footrest
- (4) 92075-140 rubber bushings
- (1) 34003-036 left bracket
- (1) 34003-037 right bracket
- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- 77-78 KZ1000 LTD
- 76 KZ900 LTD
-
Out of stock
New Reproduction Part Replaces Kawasaki P/N: 23006-038 -
Includes P/N 25012-023 Speedometer Cover 25012-024 Tachometer Cover Our P/N: 58-85100 Applications:- KZ1000 G (Z1 Classic) 77-80
- KZ1000 LTD
- KZ1000 A 77-78
- KZ900 LTD
- KZ900 A
- KZ750 G1
- KZ650 E1, D1, D2
- KZ1000 77-78
- Z1 900 73-75
- May fit others
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
92091-023 Motor Mount Bolt 10x250mm Long Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92091-023 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
New Old Stock Genuine Kawasaki P/N: 92091-002 Superseded P/N: A1020-1312 Applications:- A1 SS
- A7 SS
- 76 KH 250
- 73-75 S1 250
- 72-73 S2 350
- 74-75 S3 400
- 76-77 KH 400
- May work on others. *Please check first*
-
New Old Stock Genuine Kawasaki P/N: 92001-061 Applications:- 69-71 H1
- 72 H1C
-
Out of stock
(Set of 2) Fresh powder coat, select desired finish Kawasaki P/N: 46012-008 Applications:- 73-75 Z1 900
- 76-77 KZ 900
- 76 KZ 900 (LTD)
- 77-80 KZ 1000
- 77-80 KZ 1000 (LTD)
- 72-75 H1 500
- 69 H1 500 (MACH III)
- 72 H2 750 (MACH IV)
- 74-75 H2 750 (MACH IV)
- 73-75 F11
- 71-73 F6
- 71-75 F7
- 71-72 F8
- 72-75 F9
- Many others
-
Out of stock
Genuine Kawasaki P/N: 18024-038 Nice Used Bracket Application:- 77-78 KZ1000A
-
Quality Re-manufactured Part, Made in the U.S.A. Kawasaki P/N: 92003-071 Application:- 1972-75 H2 750 Mach IV
-
Genuine Kawasaki Part The bolts have been replated, so they will not all look exactly 100% the same. Kawasaki P/N: 92003-099 Applications:- 73-75 Z1 900
- 1980 KZ1000G (Z1 Classic)
- 76-77 KZ900A
- 1976 KZ900 LTD
- 78 & 80 Z1R
- 77-80 KZ1000A
- 77-80 KZ1000 LTD
- early KZ1000 Police
- KZ650 B
- KZ650 C
- Will work on many others. *Please check first*
-
Out of stock
Genuine Kawasaki Parts- Re-plated spring, NOS hook & cotter pin Kawasaki P/N:- 53054-001 Hook
- 53055-001 Spring
- 92041-003 Pin
- 73-75 Z1 900
- 78 KZ 1000 A
-
Out of stock
Quality reproduction part, made in Japan Replaces Kawasaki P/N: 92075-183 Kit includes:- (2) 110B0632 6x32 bolt
- (2) 461F0600 6mm spring washer
- (2) 92022-228 6mm plain washer
- (2) 92075-121 rubber, rear fender
- (2) 92027-162 collar, rear fender
- (2) 92075-183 rubber, rear fender
- (2) 92022-227 6mm plain washer
-
New Old Stock Genuine Kawasaki P/N: 23064-009 Application:- 73-75 Z1 900
-
Out of stock
Quality re-plated original part. Length 71mm Thread 12mm Kawasaki P/N:113B1271A Superseded by P/N: 92001-1265 Applications:- 76-77 KZ900 A4, A5
- 1976 KZ900 B1 LTD
- 73-75 Z1 900 A, B
- 77-80 KZ1000 A1-A4
- 77-80 KZ1000 B1-B4 LTD
- 78-81 KZ1000 C1, C1A, C2, C3, C4 Police
- 78-80 KZ1000 D1, D3 Z1R
- 79-80 KZ1000 E1, E2 Shaft
- 1980 KZ1000 G1 Z1 Classic
-
New Kawasaki Genuine Parts ~ New Old Stock We made this kit using NOS parts in our inventory. This is the original pivot pin with cotter pin. Some models use them for the seat hinge and latch, some for the seat hinge only. Please be sure to order one kit each for every application. *some models require 3 kits. Be sure to order what you need! This kit is absolutely necessary to complete your restoration! Kit includes: (1) Hinge pin P/N: 53011-001 (1) Cotter pin P/N: 550D2015 Applications:- F3 Bushwhacker
- F4 Sidewinder
- A1SS, A7, A7SS
- 69-72 H1 500
- MC1
- KD80
- Will work on many others. Please check first.
