- 73-75 Z1 900
- 76-77 KZ900A
- 1976 KZ900B LTD
- 72-75 H2 750 Triple
- 77-80 KZ1000A
- 76-79 KZ750B
-
High Quality Reproduction Part Made in the U.S.A. Replaces Kawasaki P/N:42045-018 Nut 18mm 550D4035 Pin Applications: -
Out of stock
Kawasaki Genuine Part OEM Body Cleaned and Powder Coated a Semi-Gloss finish. Very NICE part Kawasaki P/N: 23005-037-21 Applications:- 73-75 Z1 900
- Early KZ1000 Police
- H2 750 Frame # 02686 & higher
- Early KZ650
- Kz900A
Item is eligible for free domestic shipping.
-
New, High Quality Reproduction Replacement Valve Made in Japan. Replaces Kawasaki P/N: 12005-005 Applications:- 73-75 Z1 900
- 73-75 Z1 Police
- 76-77 KZ900A
- 1976 KZ900 LTD
- 1976 KZ900 Police
Item is eligible for free domestic shipping.
-
Out of stock
New Old Stock Genuine Kawasaki P/N: 25002-1052 Applications:- 85 KX 125
- 86 KXT250 Tecate
-
The DYNA S Electronic Ignition System was designed as a points replacement. Totally self-contained for easy installation. All components fit under the point cover, replacing the original points. It is designed for use with stock OEM, or other coils, or combinations of coils that have at least 3-ohms primary resistance. No more points to set! Our P/N DS2-1 Applications:- 73 - 75 Z1 900
- 76 - 77 Kz900
- 77 - 81 Kz1000
-
New Old Stock Genuine Kawasaki P/N: 14039-001 Applications:- KD 80
- KE 100
- KX 125
- KX 175
- F5
- F7
- F8
- Check with dealer
-
Quality Reproduction Part Replaces Kawasaki P/N: 56014-049 Manufacturers P/N: KFR17-93700 Kit Contains: (1) 56014-049 right emblem (1) 56013-054 left emblem (4) 92012-003 screws Applications:- 74-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- *May Fit Others
-
New Old Stock Kawasaki P/N: 16062-011 Applications:- 69-75 H1 500
- 76 KH 500A
-
This kit is made up of good quality parts, including Motion Pro fuel line. Because of the size of the Pingel fuel valve, we had to use the single outlet so that it would not interfere with the stock Z1 side cover. Quality parts for a quality fuel valve. Kit Contains:- (1) fuel line 2FT Motion Pro
- (4) 5/16 clips
- (2) 1/4 clips
- (1) T line
-
New Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 25019-014 Applications:- 74-75 H2 750
- 73-75 H1 500
- 1976 KH500
- 74-75 S3 400
- 76-78 KH400
- 73 S2 350
- 73-75 S1 250
- 1976 KH250
-
Carburetor Holder Set - Left & Right Quality Made Reproduction Part Replaces Kawasaki P/N's: (2) 16065-028 Right (2) 16065-029 Left (4) 92068-006 Rubber Plug Applications:- 1973-1975 Z1 900
- 1976-1977 KZ900 All
- 1977-1980 KZ1000 All
-
Bearings to fit rear brake hub and sprocket carrier. Kit P/N: 0215-0830 Replaces Kawasaki P/N's: 1) 601B6304Z Bearing 1) 601B6304 Bearing 1) 601B6206 Bearing 1) 92050-027 Seal Applications:- 1972-1975 H2 750
- 1973-1975 Z1 900
- 1976-1977 KZ900A
- May fit others
-
Nice Replated Bracket Kawasaki P/N: 35026-006 Applications:- 73-75 Z1 900
- 76-77 KZ900A
- 77-78 KZ1000A
- 77-80 KZ1000 LTD
- 78-81 KZ1000 Police
-
Set of 2 Rear Passenger Foot Peg Rubbers Highest Quality Reproduction! Replaces Kawasaki P/N: 92076-009 Applications:- A1, A1SS
- A7, A7SS
- H1 500, H1C
- W1, W1SS
- W2SS, W2TT
-
Out of stock
Chrome Exhaust Clamp Set of 2 Quality Japanese Made Reproduction Part Replaces Kawasaki P/N: 92037-103 Sold as Shown (set of 2) Applications:- 73-75 Z1 900
- 76-77 KZ900 A
-
Footrest bar cap. Sold as a set of 4 Quality part made in the USA Replaces Kawasaki P/N: 92102-010 Applications:- Z1 900
- KZ900 LTD
- KZ900A
- Z1R
- KZ1000A 77-80
- KZ1000LTD 77-80
- KZ750B 76-79
- KZ650