- 1980 KZ1000D Z1R
- 1979-1980 KZ1000A MKII
- 1979-1981 KZ1000C Police
All Re-plated, Powder Coated, etc. and Used Unrestored
-
VIN #: KZT00A514747 ENG #: KZT00AE057797 16805 miles Dyna ignition top and bottom, Ricks Electric regulator/rectifier, new master cylinder, new brake lines, correct date-coded rims, original seat, new air filter, new air box rubbers, cleaned carburetor, new fuel Ts, needles, seats, float gaskets, top cover gaskets, Pingel fuel valve, rebuilt carburetors, valves re-shimmed, stock air box, powder coated center stand, new side cover grommets, rear sprocket lock tabs, complete front brake system has been redone using DOT 5 fluid. New throttle cable, new brake light switch, oil and filter change, original lion’s head key, manual tray, owners manual, original grips, original fenders. Clamp that holds air box to the silencer is not genuine, but is stainless. Mirrors are reproduction. Tank has a dent on the center of the right side, as shown. Possibly could be fixed. Tires are original Bridgestone raised white letter but we are considering replacing them with more modern Kenda tires. Has Manley cam covers, as shown. Reproduction mirrors. This bike came with a Kerker header, so we replaced it with a hard-to-find exhaust we had in stock which has road-rash as shown, but this motorcycle does not have crash damage! Runs nice. we set this up as a very original every day rider. Everything works. No smoke. Possible low-cost shipping available upon request.
-
Out of stockGenuine Kawasaki Z1 900 903 cylinder has been freshly bored and vapor blasted. Each piston is marked their respective cylinders, as no 2 pistons are alike. Very nice assembly. Kit contains:
- 11005-136-2H OEM cylinder (1)
- 13029-058 Piston 0.50 (4)
- 13025-046 Ring (4)
- 13002-022 Pin (4)
- 92036-021 Clip (8)
- 74-75 Z1 900
- 76-77 KZ900A
- 76 Z1 900 LTD
-
This bike was rescued from the scrap pile. Selling for parts only. No title. 20,444 miles. Motor turns over only 180 degrees--possible bent valve. Throttle is locked up. Seat is in bad shape, as shown. Missing left side cover, Gas tank is missing the key. Motor has been painted, paint is coming off. 6-into-1 header. Head is most likely good, as well as cylinders. Fork tubes are nice, headlight stays and bucket are in solid condition. We are not KZ1300 experts, so we're looking for a new home for this bike. Many hard to find parts. CALL WITH NEEDS. 330-335-7365. PRICED TO SELL!
-
VIN# JKAKZBD12CA003038 ENG#: KZT10AE014583 We are selling this bike with title, as-is, or parting out. Motor is stuck. No tank, no side covers, hole in bottom of headers. Seat pan rusty. No broken fins. Could be a good donor. Many good parts here. Coils, electrics, shock boots. Selling as-is or parting out. Good title, frame is straight.
-
Out of stock34219 Miles Frame# KZ650B-509216 Engine# KZ650BE062253 We bought this bike earlier last summer and are just now getting to it. We replaced the starter clutch, so many gaskets have been replaced, tires are good, new rubber plug in headlamp, it has a decent Kerker header. Not original paint, there is a crack on tail section as shown. Original tool kit and manual, new seat cover new battery, carburetor clean, new handlebar switches, new grips, new starter clutch. Oil and filter change, new spark plugs, engine gaskets, new carb-to-air filter boots. Speedo has dent as shown, perhaps from a front fairing mounted at one time. Nice everyday rider, great candidate for restoration or cafe racer. Possible low-cost shipping available upon request.
-
Out of stockNicely polished Front Sprocket Cover with Clutch Inspection Cover. Genuine Kawasaki, Used Kawasaki P/N: 14026-1017 Applications:
- 1979-1980 KZ1000A MKII
- 1979-1980 KZ1000B LTD
- 1979-1981 KZ1000C Police
- 1980 KZ1000D Z1R
-
Parting this bike out. Please call with needs. 330-335-7365
Motor is stuck, missing tank, missing side covers, pipes are rusted through on bottom. Seat pan is rusty with holes. Missing point cover. Missing some airbox parts. No broken fins. Many parts are in common with the 77-78 Kawasaki KZ1000A LTD. Triple clamps would be slightly different offset. Meters, master cylinder and switches aren't too bad. If interested, please call us with needs. 330.335-7365 -
This piece came from a vintage drag inventory we recently acquired. Not sure if it is from a 1979 or 80 model as the part numbers differ. Should fit either, but the tubes must be used with the lower legs. Possible low-cost shipping upon request, or local pick up if preferred. WILL SEPARATE. Sold as shown - no returns
-
Out of stockMotor# KZT00AE079317 We are selling this rebuilt engine for our mechanic, Hilo. Mark II style head, 79 or 80 KZ1000 LTD. This motor has been down to the bare cases. First-over pistons. Everything is nice. Valve job, clutch is good. There is some pitting on the engine case on the top as shown. Motor cases have been vapor blasted. All new seals, gaskets, oil window brand new. No welding, no broken fins. Bolts and hardware have been replaced. all exhaust studs are nice, tachometer drive is nice. This is basically a nice, plug-in motor. A screw on the side has been repaired and there is a small hole, as shown. Does not have an ignition system in it. There is nothing broken, no broken fins. We have everything in stock to finish this motor. Applications:
- 73-75 Z1 900 chassis
- Up to 1980 KZ900, KZ1000.
- 79-81 KZ1000 Police Bike.
-
Used Genuine Kawasaki P/N's: 21007-1036 Rotor 13196-1006 Clutch Will fit:
- 1982-1983 KZ1000R
- 1981-1983 KZ1000J
- 1981-1982 KZ1000K LTD
- 1981-1982 KZ1000M CSR
- 1982-1986 KZ1000 Police
- 1987-1990 KZ1000 Police
- 1991-1995 KZ1000 Police
- 1996-2000 KZ1000 Police
- 2001 KZ1000 Police
- 1981-1982 GPZ1100
- 1981-1983 KZ1100A
- 1983 KZ1100L1 LTD
- may fit others
-
Out of stockGenuine Kawasaki, Used Contains the following Kawasaki P/N's: 14032-1015 Cover 14046-024 Gasket 52015-004 Sight Glass Applications:
- 1979-1980 KZ1000 LTD
- 1978-1981 KZ Police
- 1978-1980 Z1R
- 1979-1980 MKII
-
Clymer P/N: 352 Condition: Used Manual is in decent condition, showing some wear and discoloration due to age. Binding and cover in place. As we have more than one of these manuals, you may not receive the one pictured, but they are all in similar condition. Print Date: 1972 Pages: 132 Models Covered:
- A1 250cc 1966
- A1SS 250cc 1967
- A1R 250cc 1968
- A7 350cc 1967
- A7SS 350cc 1968
- A7R 350cc 1968
-
Out of stockThis side cover is in very nice shape. Has slight scuffs, as shown in center of cover. OEM Harley P/N: 66251-04A Applications:
- 04-13 Sportster, left side