- 1973-1975 Z1 900
- 1976-1977 KZ900 A
- 1977-1980 KZ1000 A
- 1977-1981 KZ1000 B
- 1978-1981 KZ1000 C Police
-
Out of stockNicely polished Front Sprocket Cover with Clutch Inspection Cover. Genuine Kawasaki, Used Kawasaki P/N: 14026-1017 Applications:
- 1979-1980 KZ1000A MKII
- 1979-1980 KZ1000B LTD
- 1979-1981 KZ1000C Police
- 1980 KZ1000D Z1R
-
Out of stockMotor# KZT00AE079317 We are selling this rebuilt engine for our mechanic, Hilo. Mark II style head, 79 or 80 KZ1000 LTD. This motor has been down to the bare cases. First-over pistons. Everything is nice. Valve job, clutch is good. There is some pitting on the engine case on the top as shown. Motor cases have been vapor blasted. All new seals, gaskets, oil window brand new. No welding, no broken fins. Bolts and hardware have been replaced. all exhaust studs are nice, tachometer drive is nice. This is basically a nice, plug-in motor. A screw on the side has been repaired and there is a small hole, as shown. Does not have an ignition system in it. There is nothing broken, no broken fins. We have everything in stock to finish this motor. Applications:
- 73-75 Z1 900 chassis
- Up to 1980 KZ900, KZ1000.
- 79-81 KZ1000 Police Bike.
-
Used Genuine Kawasaki P/N's: 21007-1036 Rotor 13196-1006 Clutch Will fit:
- 1982-1983 KZ1000R
- 1981-1983 KZ1000J
- 1981-1982 KZ1000K LTD
- 1981-1982 KZ1000M CSR
- 1982-1986 KZ1000 Police
- 1987-1990 KZ1000 Police
- 1991-1995 KZ1000 Police
- 1996-2000 KZ1000 Police
- 2001 KZ1000 Police
- 1981-1982 GPZ1100
- 1981-1983 KZ1100A
- 1983 KZ1100L1 LTD
- may fit others
-
Out of stockGenuine Kawasaki, Used Contains the following Kawasaki P/N's: 14032-1015 Cover 14046-024 Gasket 52015-004 Sight Glass Applications:
- 1979-1980 KZ1000 LTD
- 1978-1981 KZ Police
- 1978-1980 Z1R
- 1979-1980 MKII
-
Out of stockGenuine Kawasaki ~ Used, Polished Contains Kawasaki P/N's: 14026-039-80 Cover 14026-012 Cover 14045-015 Gasket Applications:
- 1977-1978 KZ1000A
- 1977-1978 KZ1000 LTD
- 1978 Z1R
- 1978 KZ1000 Police
-
Out of stockQuality reproduction part Replaces OEM P/N: 43015-1009 Applications:
- 77-79 KZ650B
- 78-79 KZ650C Custom
- 78-79 KZ650D
- 79-80 KZ1000A
- 78-80 KZ1000B LTD
- 78-80 KZ1000C Police
-
Bike does run. Seat needs recovered 52,000 miles changed oil, filter and spark plugs. 1000 LTD carbs. No broken fins on cylinder or head. Could be a good motor for another police bike or street bike. Doesn’t smoke, could use some tuning. Tachometer and Speedometer are not working. Runs rough. Transmission is good, has all the gears. Goes into gear nicely, doesn’t seem to smoke. Charging system seems to be over-charging; regulator/rectifier is bad, but it is putting out of the stator, so it probably has a good flywheel. Side covers have tab broken off both right and left. We believe these to be original paint. Gas tank has rust inside. Fairing has the bracket on front and some extra holes where equipment has been mounted. Please give us a call with your needs. View movie for more details.
-
Sale!Kawasaki Genuine Part ~ New Old Stock Kawasaki P/N: 2) 43050-010 Applications:
- 77-78 KZ1000A
- 1978 KZ1000P POLICE
-
Nice used camshaft set. Genuine Kawasaki P/N's: 12044-014 Intake 12044-015 Exhaust Applications:
- Correct hollow shaft for 1973 and Early 1974 Z1
- 74-75 Z1 900
- 76-77 KZ900 A
- 76 KZ900 LTD
- KZ900 Police
- 77-80 KZ1000 A
- 80 KZ1000 G (Z1 Classic)
- 78-81 KZ1000 Police
- 79-80 KZ1000 E (Shaft)
- 78 & 80 KZ1000 D (Z1-R)