- Z1 900
- Early KZ1000
- May fit others
-
This is a ready-to-go bolt-on kit, complete with Wiseco 1015 kit. Freshly-bored cylinder. A couple of minor blemishes as shown. Because of the small size of the blemish we didn't think it was necessary to fix it. This is the same setup we use on our restorations. Applications:
- 74-75 Z1 900
- 76-77 KZ900A
- 76 KZ900B LTD
-
This kit contains all necessary OEM replacement parts to rebuild one front brake caliper assembly. Kit made in Japan. Our P/N: 32-1289 Replaces Kawasaki P/N:
- (1) 43054-003 Dust Seal
- (1) 43049-002 Piston Seal Ring
- (4) 43052-005 Dust Boot
- (4) 43053-006 O-Ring
- (1) 43057-003 Bleeder Cap
- 1976-77 KZ900A
- 1977-80 KZ1000A
- 1979-80 KZ1000B LTD
- 80 KZ1000D Z1R
- 1979-81 KZ1000C Police
- 1980 KZ1000-G1 Classic
- 1979-80 KZ1000E Shaft
-
Kawasaki P/N: 51001-1009-7V We bead blasted this tank to make sure it was able to accept emblems, as shown. Inside is nice, as shown. Outside has imperfections, as shown. Please keep in mind that the 78 KZ1000A takes a fuel valve that is held on with 2 bolts. Using the proper valve, this tank will fit: Applications:
- 73-75 Z1 900
- 76-77 KZ900A
- 77 KZ1000A
- (Correct for a 78 KZ1000A)
-
Please call with needs! Motor SC84E***0632 Frame SC04-2000361 Offering for parts only. Stock airbag, fenders are gooned, tires are rotted out. Kick starter okay, we are getting the points cover and right side cover polished. (not shown in photos). Chain guard pretty good. Intake manifolds are junk, dyna cover has been scratched, seat lock is bad, side covers are okay. Wiring harness must be tested. Seat lock is bad. Still good parts on this bike, and some are interchangeable with the KZ1000.
-
Out of stockThe pan and foam are in great condition. Cover is brand new. Kawasaki P/N: 53001-106 Applications:
- 74-75 KZ400
- Looks like it will fit 76-77, but not 100% sure. Please check first.
-
Out of stockSold as set of 2. These shock lowers were removed from a KZ1000A. Sold as shown, no returns. Applications:
- 73-75 Z1 900
- 76-77 KZ900A
- More
-
Out of stockGenuine Kawasaki P/N: 27005-5019 Comes with 2 keys. Applications:
- 81-82 KZ1000K LTD
- 81-82 KZ1000J
- 82 KZ1000R Eddie Lawson Replica
- 81 KZ1100B GPZ1100
- And more
-
Out of stockNew Old Stock Genuine Kawasaki P/N: 92004-045 Our P/N: 92004-045-KIT Kit includes:
- (4) 92004-045
- (4) 92004-046
- (4) 92004-047
- 73-75 Z1 900
- KZ 1000
-
Out of stockComplete Cylinder Stud Kit Genuine Kawasaki - New Old Stock Our P/N: 92004-052-KIT Includes:
- 92004-052 (Quantity 6)
- 92004-053 (Quantity 2)
- 1974 KZ400
- 75-77 KZ400D
- 75-77 KZ400S
- 77-78 KZ400A Deluxe
-
Out of stockQuality restoration. Vapor blasted cylinder head cover with polished ends. OEM Kawasaki P/N: 11002-009-2H Includes P/N: 11009-1025 Gasket Applications:
- 78 KZ650D SR
- 77-78 KZ650C Custom
- 77-78 KZ650B
-
Out of stockNew Old Stock Kit contains Genuine Kawasaki P/N:
- 33040-062 LH adjuster
- 33040-043 RH adjuster
- 92001-1179 Bolts (2)
- 312B0800 Nuts (2)
- 74-77 KZ400D
- 75-77 KZ400 S
- 77-78 KZ400A
-
Out of stockWe removed this wheel from a Z1 900. Very nice drum. We can remove the drum for lower-cost shipping. Can also replace to 18" for additional cost. See video below. Applications:
- 73-75 Z1 900
- 76-77 KZ 900A
- Late 73-75 H2 750
-
Out of stockNew Old Stock Genuine Kawasaki P/N: 35011-1076 Applications:
- 82-83 KZ550C LTD
- 82-83 KZ550A
- 82 KZ750-MI CSR
-
Out of stockNew Old Stock Genuine Kawasaki P/N: 34003-1077 Applications:
- 82-83 KZ550C LTD
- 82-83 KZ550A
- 82 KZ750M CSR