


|
Kawasaki H1 Chassis Parts
Dunlop Gold Seal K87 REAR TIRE |
This is a NEW original equipment replacement rear tire for most Vintage Japanese Motorcycles. This tire was OEM on the Kawasaki Z1 & H2. Also the Honda CB750. This is New Stock, Not New Old Stock. The perfect tire for your Z1 or H2 Restoration.
The tire size is 4.00-18 64H. This is a directional Tire. Black sidewall. Stamped "Made in Japan".
$175.00
|
 |
 |
Dunlop Gold Seal F11 Front Tire |
This is a NEW original equipment replacement Front tire for most Vintage Japanese Motorcycles. This tire is a great replacement on the Kawasaki Z1 & H2. Also the Honda CB750.
This is New Stock, Not New Old Stock.
The period type tire for your Z1 or H2 Restoration.
The tire size is 100/90-19 57H. Black sidewall. Stamped "Made in Japan".
$50.00
Visit our eBay Store for "Buy It Now" on this Item!
|

|
New Front Brake Rotor Kawasaki H1 500 |
NEW Genuine Kawasaki Part.
Part number: 41080-005.
$450
Fits: 76 KH500-A8 / 77-79 Kz650-B / 76-79 Kz750-B /
76-77 Kz900-A / 77-78 Kz1000-A
|
|
FRONT DID RIM |
New DID 1.85x19 (WM2)- 40 spoke Chrome Steel Rim.
Made in Japan by Daido Kogyo Co.,LTD.
Rim is Stamped: D.I.D. J 19x1.85 16 90 --14 07-- 110106 DOT
Fits: 73-75 Z1 900 / 76-77 Kz900A / 76 Kz900 LTD / early Kz1000 / H1 500 triple and H2 750 Triple.
May work with others!
$100.00
|
|
|
 |
Upper Triple Clamp NOS Kawasaki H1 500 |
Genuine Kawasaki Part. This Item is New Old Stock. This item has some lite scratches. Comes as shown. Kawasaki part numbers 44039-048.
Fits the 1973-76 H1 500 / 74-75 H2 750 Triple
Sold as One
$150
Visit our eBay Store for "Buy It Now" on this Item! |
 |
Side Cover Emblem |
White Side Cover Emblem
This is a New Reproduction side cover emblem for the early Kawasaki H1 500.
Replaces OEM part number 56018-021.
This emblem is used mostly on White body paint.
$50.00
|
 |
Black Side Cover Emblem
This is a New Reproduction side cover emblem for the early Kawasaki H1 500.
Replaces OEM part number 56018-025.
This emblem is used mostly on 1970 H1.
$50.00
Visit our eBay Store for "Buy It Now" on this Item! |
 |
Side Cover Decal 70 Kawasaki H1 500 Mach III Triple |
Highest Quality, Replacement part.
Made in Japan.
Fits: 1970 H1 500 Mach III
$25.00
Sold as each |
 |
Kawasaki H2 750 Fuel Tank Strap H1 500 |
This is a New tank strap and will fit the following models: G5; G5B; G5C; KE100-A10, A5, A6, A8, A9; F6; F7C; F7; S1B; S1C; S2; H1D; H1E; H1F; KH500-A8; H2, H2B, H2C.
Kawasaki Part number:
92072-029 or 92072-050
$25.00 |
 |
Handle Bar Bolts Kawasaki H1 500 |
These are a very nice reproduction replacement Handle Bar Bolts & Washers. Comes as shown, set of Four.
Replaces Kawasaki P/N 92007-002
Fits 69-75 H1 500 / 76 KH500 / 72 74-75 H2 /
68-69 W1 650 / 67-70 W2 650
$25.00
Visit our eBay Store for "Buy It Now" on this Item |
 |
Side Cover Decal 69 Kawasaki H1 500 Mach III Triple |
Highest Quality, Replacement part. Made in Japan.
Fits: 69 H1 500 Mach III
$25.00 |
 |
Steering Damper Boot Kawasaki H1 500 Triple W1 W2 A7 |
Highest Quality, Replacement part. Made in Japan to OEM specifications. These boots were used on the early Kawasaki Steering Damper from the W1 & W2 650, 69-71 500 H1 triples, A7 and A1.
Pictured is the style Steering Damper this boot fits. Damper not included with purchase of boot.
$60.00 |
 |
Shock Bushings Kawasaki Z1 900 KZ900 KZ1000 H1 500 |
Genuine Kawasaki part. These bushings replace the one piece upper shock bushing. Two per shock.
Kawasaki P/N 45017-001.
Fits 73-75 Z1 900 / 76-77 Kz900 / H1 500 /
W1 W2 650
Sold as Set of Four (two Shocks)
$24.00 set |
|
Front Wheel Assembly |
This wheel is for a 1973-75 Z1 900, 1972-75 H-2, 1972-75 H1.
The hub is genuine Kawasaki, it has been rebuilt and powder coated. The spokes are NEW and just like genuine.
The rim is NEW 1.85x19 made by DID. This is a perfect part for that restoration project or show bike.
It comes with a rim band.
$330 |
 |
Fuel Tank Rubber |
This is a "New Old Stock" Genuine Kawasaki.
Part number: 92075-084
This fits: 73-75 Z1 / 73-75 H1 500 / 74-75 H2 750
$10.00 each |
|
HOSE BRACKET GROMMET for BRAKE LINE |
This is a very nice reproduction replacement part "Made in Japan". Meets or exceeds OEM Specifications.
Replaces Kawasaki Part 43064-001
-
This fits
-
73-75 Z1 900
-
76-77 Kz900A
-
72/74-75 H2 750 Triple
-
72-75 H1 500 Triple
-
76 KH500-A8 Triple
-
74-75 S3 400 Triple
-
76-78 Kh400 Triple
-
May fit others!
$10.00 |
|
Fuel Cap |
This is a very nice Reproduction Fuel Cap. Comes with all hardware shown plus the rubber seal.
Fit: 73-75 Z1 900 / 74-75 H2 750 / 73-75 H1 500 / 74-75 S1 & S2
Sold as shown
$75.00 |
 |
Master Cylinder Rebuild Kit |
Highest Quality, Replacement part. Made in Japan.
This is the master cylinder rebuilt kit. Includes as shown, Valve assy, Spring Assy, Piston Cup, Piston Assy, Piston Stopper, Cir-Clip, and Stopper boot.
Used on stock OEM Master cylinder.
Replaces Kawasaki Kit P/N 43073-001
Fits: 73-75 Z1 900 / 76-77 Kz900 / 72-74 H1 500 / 72,74-75 H2 750
$60.00 kit |
 |
Foot Pegs |
LEFT FOOT PEG.
Highest Quality, Replacement part. Made in Japan to OEM specifications.
Replaces Kawasaki P/N 34028-011.
-
Fits
-
73-75 Z1 900
-
76-77 Kz900
-
77-78 Kz1000
-
77-79 Lz1000 LTD
-
73-75 H1 500
$25.00 each |
 |
RIGHT FOOT PEG
Highest Quality, Replacement part. Made in Japan to OEM specifications.
Replaces Kawasaki P/N 34028-012.
-
Fits
-
73-75 Z1 900
-
76-77 Kz900
-
77-78 Kz1000
-
77-79 Lz1000 LTD
-
73-75 H1 500
$25.00 each |
 |
FRONT ROTOR LOCK WASHER KIT |
Nice reproduction Item made in japan.
Meets or exceeds OEM specifications.
Replaces Kawasaki P/N 92088-014
Fits: 73-75 Z1 900 / 76-77 Kz900 / 72 74-75 H2 750 / 72-75 H1 500
$20.00 set |
|
Wheel Dust Cover Screws |
These Screws are for holding the chrome dust cover on the front wheel. This purchase comes with Three screws.
Replaces Kawasaki Part Number 222E0508A
Will work for 73-75 Z1 900 / 72-75 H1 500 / 72 74-75 H2 750
$5.00 set |
|
RELECTORS |
Quality Reproduction Replacement Part
Replaces Kawasaki P/N 28001-004
Will work on 69-71 H1 500 / W1 W2 / A1 A7
$75.00 set |
|
STEERING STEM BEARING KIT |
This kit is from ALL BALLS Racing Products. Designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings. Kit comes complete with upper and lower taper bearing cups and cones and seal. Tapered roller bearings decrease maintainance along with less wear and longer life.
This kit will work on 69-74 H1 500 / 72-75 H2 750
$35.95
Visit our eBay Store for "Buy It Now" on this Item! |
 |
|